Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and...

Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen).

Mark the AVRISP-MKII project descriptors as being both Bus Powered and Device Powered.

Copy over file level documentation of the peripheral drivers to the module level documentation.

LUFA/Doxygen.conf

@@ -496,7 +496,7 @@ SHOW_DIRECTORIES       = YES
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
 
-SHOW_FILES             = NO
+SHOW_FILES             = YES
 
 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
 # Namespaces page.

LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h

@@ -39,6 +39,11 @@
 /** \ingroup Group_ADC
  *  @defgroup Group_ADC_AVRU4U6U7 Series U4, U6 and U7 Model ADC Driver
  *
+ *  ADC driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
+ *        dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
+ *
  *  @{
  */
  

LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h

@@ -39,6 +39,11 @@
 /** \ingroup Group_TWI
  *  @defgroup Group_TWI_AVRU4U6U7 Series U4, U6 and U7 Model TWI Driver
  *
+ *  Master mode TWI driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the TWI driver
+ *        dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
+ *
  *  @{
  */
 

LUFA/Drivers/USB/HighLevel/StdDescriptors.h

@@ -124,14 +124,14 @@
 			 *  descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power
 			 *  from the device's own power source.
 			 */
-			#define USB_CONFIG_ATTR_SELFPOWERED       0xC0
+			#define USB_CONFIG_ATTR_SELFPOWERED       0x40
 
 			/** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t
 			 *  descriptor's ConfigAttributes value to indicate that the specified configuration supports the
 			 *  remote wakeup feature of the USB standard, allowing a suspended USB device to wake up the host upon
 			 *  request.
 			 */
-			#define USB_CONFIG_ATTR_REMOTEWAKEUP      0xA0
+			#define USB_CONFIG_ATTR_REMOTEWAKEUP      0x20
 
 			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
 			 *  Attributes value to indicate that the specified endpoint is not synchronized.

LUFA/ManPages/ChangeLog.txt

@@ -50,6 +50,7 @@
   *  - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe
   *  - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account
   *  - Fixed EEPROM and FLASH ISP programming in the AVRISP project
+  *  - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)
   *
   *  \section Sec_ChangeLog091223 Version 091223
   *

Projects/AVRISP-MKII/Descriptors.c

@@ -81,7 +81,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 			.ConfigurationNumber    = 1,
 			.ConfigurationStrIndex  = NO_DESCRIPTOR,
 				
-			.ConfigAttributes       = USB_CONFIG_ATTR_SELFPOWERED,
+			.ConfigAttributes       = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
 			
 			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
 		},