Add basic hardware mapping information for all supported boards.

LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h

@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Adafruit U4 Breakout board (http://ladyada.net/products/atmega32u4breakout).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel ATAVRUSBRF01.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h

@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Atmel ATAVRUSBRF01.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>RX LED</td><td>High</td><td>PORTD.0</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>TX LED</td><td>High</td><td>PORTD.1</td></tr>
+ *  </table>
+ *
  *  @{
  */
 
@@ -61,15 +67,6 @@
 			#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
 		#endif
 
-	/* Private Interface - For use in library only: */
-	#if !defined(__DOXYGEN__)
-		/* Macros: */
-			#define LEDS_PORTD_LEDS       (LEDS_LED1 | LEDS_LED2)
-			#define LEDS_PORTE_LEDS       (LEDS_LED3 | LEDS_LED4)
-
-			#define LEDS_PORTE_MASK_SHIFT 4
-	#endif
-
 	/* Public Interface - May be used in end-application: */
 		/* Macros: */
 			/** LED mask for the first LED on the board. */

LUFA/Drivers/Board/AVR8/BENITO/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BENITO/LEDs.h

@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>TX LED</td><td>Low</td><td>PORTC.7</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>RX LED</td><td>Low</td><td>PORTC.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h

@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTF.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTF.7</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Unknown</td><td>LED2</td><td>High</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h

@@ -40,7 +40,13 @@
  *  \defgroup Group_LEDs_BLACKCAT BLACKCAT
  *  \brief Board specific LED driver header for the BLACKCAT USB JTAG.
  *
- *  Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB/.
+ *  Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB).
+ *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTD.3</td></tr>
+ *  </table>
  *
  *  @{
  */

LUFA/Drivers/Board/AVR8/BUI/LEDs.h

@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Busware BUI (http://www.busware.de/tiki-index.php?page=BUI).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>RGB LED</td><td>High</td><td>PORTC.2</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>RGB LED</td><td>High</td><td>PORTC.3</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Blue</td><td>RGB LED</td><td>High</td><td>PORTC.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h

@@ -44,6 +44,11 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
  *  layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h

@@ -44,6 +44,11 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
  *  layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTD.2</td><td>PORTD.3</td><td>PORTD.0</td><td>PORTD.1</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h

@@ -44,6 +44,14 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external
  *  peripheral layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/CULV3/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/CULV3/LEDs.h

@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/EVK527/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB321C (4MB)</td><td>PORTE.6</td><td>SPI0</td></tr>
+ *  </table> 
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/EVK527/Joystick.h

@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTF.4</td><td>PORTF.5</td><td>PORTF.7</td><td>PORTC.6</td><td>PORTF.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/EVK527/LEDs.h

@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h

@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h

@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h

@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Maximus (http://www.avrusb.com/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>LG</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>LR</td><td>High</td><td>PORTB.7</td></tr>
+ *  </table>
+ *
  *  @{
  */