Commit 62022252 authored by Dean Camera's avatar Dean Camera
Browse files

Add special support to the AVRISP-MKII for the new model USBTINY-MKII's...

Add special support to the AVRISP-MKII for the new model USBTINY-MKII's additional LED to indicate target power source.

Add support to the USBTINY-MKII's additional LED in the board's LED driver header.

Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.
parent 30c2b620
......@@ -72,8 +72,11 @@
/** LED mask for the second LED on the board. */
#define LEDS_LED2 (1 << 7)
/** LED mask for the third LED on the board. */
#define LEDS_LED3 (1 << 5)
/** LED mask for all the LEDs on the board. */
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
/** LED mask for the none of the board LEDs. */
#define LEDS_NO_LEDS 0
......
......@@ -20,6 +20,7 @@
* - Added start of a new Test and Measurement class demo (thanks to Peter Lawrence)
* - Added new SPI_ORDER_* data order masks to the SPI peripheral driver
* - Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver
* - Added support for the new button/LED on the latest model USBTINY-MKII
*
* <b>Changed:</b>
* - The RingBuff library code has been replaced in the XPLAINBridge, Benito and USBtoSerial projects with an ultra lightweight
......@@ -39,6 +40,7 @@
* behaviour of the command line tools used to perform the check on each platform
* - Internal USB driver source files renamed and moved to ease future possible architecture ports
* - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability
* - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED
*
* <b>Fixed:</b>
* - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from
......
......@@ -49,6 +49,12 @@ int main(void)
for (;;)
{
#if (BOARD == BOARD_USBTINYMKII)
/* On the USBTINY-MKII target, there is a secondary LED which indicates the current selected power
mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
LEDs_ChangeLEDs(LEDMASK_VBUSPOWER, (PIND & (1 << 0)) ? LEDMASK_VBUSPOWER : 0);
#endif
AVRISP_Task();
USB_USBTask();
}
......@@ -66,7 +72,7 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
USB_Init();
USB_Init();
}
/** Event handler for the library USB Connection event. */
......
......@@ -42,8 +42,6 @@
#include <avr/interrupt.h>
#include <avr/power.h>
#include "Descriptors.h"
#include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
......@@ -52,6 +50,7 @@
#include <LUFA/Drivers/Peripheral/ADC.h>
#endif
#include "Descriptors.h"
#include "Lib/V2Protocol.h"
/* Macros: */
......@@ -59,16 +58,19 @@
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
#define LEDMASK_USB_ENUMERATING (LEDS_LED1 | LEDS_LED2)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
#define LEDMASK_USB_READY LEDS_LED2
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
#define LEDMASK_USB_ERROR LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2)
/** LED mask for the library LED driver, to indicate that the target is being powered by VBUS. */
#define LEDMASK_VBUSPOWER LEDS_LED3
/* Function Prototypes: */
void SetupHardware(void);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment