Commit 7375c789 authored by Dean Camera's avatar Dean Camera
Browse files

Document build system targets. Add a rule to the BUILD module that is run if a...

Document build system targets. Add a rule to the BUILD module that is run if a source file does not exist to show an error to the user, rather than running the check-source rule before each build (slightly faster/more portable and the generated error is then a true make error).
parent 3e50a594
...@@ -89,10 +89,12 @@ else ...@@ -89,10 +89,12 @@ else
$(error Unsupported architecture "$(ARCH)") $(error Unsupported architecture "$(ARCH)")
endif endif
# Programs in the target FLASH memory using ATPROGRAM
atprogram: $(TARGET).elf $(MAKEFILE_LIST) atprogram: $(TARGET).elf $(MAKEFILE_LIST)
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\" @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\"
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $< atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $<
# Programs in the target EEPROM memory using ATPROGRAM
atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST) atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST)
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\" @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\"
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $< atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $<
......
...@@ -72,10 +72,12 @@ MSG_AVRDUDE_CMD := ' [AVRDUDE] :' ...@@ -72,10 +72,12 @@ MSG_AVRDUDE_CMD := ' [AVRDUDE] :'
# Construct base avrdude command flags # Construct base avrdude command flags
BASE_AVRDUDE_FLAGS := -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) BASE_AVRDUDE_FLAGS := -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
# Programs in the target FLASH memory using AVRDUDE
avrdude: $(TARGET).hex $(MAKEFILE_LIST) avrdude: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
avrdude $(BASE_AVRDUDE_FLAGS) -U flash:w:$< $(AVRDUDE_FLAGS) avrdude $(BASE_AVRDUDE_FLAGS) -U flash:w:$< $(AVRDUDE_FLAGS)
# Programs in the target EEPROM memory using AVRDUDE
avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST) avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST)
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
avrdude $(BASE_AVRDUDE_FLAGS) -U eeprom:w:$< $(AVRDUDE_FLAGS) avrdude $(BASE_AVRDUDE_FLAGS) -U eeprom:w:$< $(AVRDUDE_FLAGS)
......
...@@ -36,6 +36,8 @@ LUFA_BUILD_PROVIDED_MACROS += ...@@ -36,6 +36,8 @@ LUFA_BUILD_PROVIDED_MACROS +=
# output files # output files
# mostlyclean - Remove intermediatary output files, but # mostlyclean - Remove intermediatary output files, but
# preserve binaries # preserve binaries
# <filename>.s - Compile C/C++ source file into an assembly file
# for manual code inspection
# #
# MANDATORY PARAMETERS: # MANDATORY PARAMETERS:
# #
...@@ -207,14 +209,17 @@ endif ...@@ -207,14 +209,17 @@ endif
size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
# Pre-build informational target, to give compiler and project name information when building
build_begin: build_begin:
@echo $(MSG_INFO_MESSAGE) Begin compilation of project \"$(TARGET)\"... @echo $(MSG_INFO_MESSAGE) Begin compilation of project \"$(TARGET)\"...
@echo "" @echo ""
@$(CROSS)-gcc --version @$(CROSS)-gcc --version
# Post-build informational target, to project name information when building has completed
build_end: build_end:
@echo $(MSG_INFO_MESSAGE) Finished building project \"$(TARGET)\". @echo $(MSG_INFO_MESSAGE) Finished building project \"$(TARGET)\".
# Checks all target source files and provides information on whether they exist or not
check-source: check-source:
@for f in $(SRC); do \ @for f in $(SRC); do \
if [ ! -f $$f ]; then \ if [ ! -f $$f ]; then \
...@@ -223,77 +228,100 @@ check-source: ...@@ -223,77 +228,100 @@ check-source:
fi; \ fi; \
done done
# Prints size information of a compiled application (FLASH, RAM and EEPROM usages)
size: $(TARGET).elf size: $(TARGET).elf
@echo $(MSG_SIZE_CMD) Determining size of \"$<\" @echo $(MSG_SIZE_CMD) Determining size of \"$<\"
@echo "" @echo ""
$(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null; $(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null;
# Prints size information on the symbols within a compiled application in decimal bytes
symbol-sizes: $(TARGET).elf symbol-sizes: $(TARGET).elf
@echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes @echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes
$(CROSS)-nm --size-sort --demangle --radix=d $< $(CROSS)-nm --size-sort --demangle --radix=d $<
# Cleans intermediatary build files, leaving only the compiled application files
mostlyclean: mostlyclean:
@echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\" @echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\"
rm -f $(OBJECT_FILES) rm -f $(OBJECT_FILES)
@echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\" @echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\"
rm -f $(DEPENDENCY_FILES) rm -f $(DEPENDENCY_FILES)
# Cleans all build files, leaving only the original source code
clean: mostlyclean clean: mostlyclean
@echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\" @echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\"
rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym $(TARGET).a rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym $(TARGET).a
all: build_begin check-source elf hex lss sym size build_end # Performs a complete build of the user application and prints size information afterwards
all: build_begin elf hex lss sym size build_end
# Helper targets, to build a specific type of output file without having to know the project target name
lib: lib$(TARGET).a lib: lib$(TARGET).a
elf: $(TARGET).elf elf: $(TARGET).elf
hex: $(TARGET).hex $(TARGET).eep hex: $(TARGET).hex $(TARGET).eep
lss: $(TARGET).lss lss: $(TARGET).lss
sym: $(TARGET).sym sym: $(TARGET).sym
# Default target to *create* the user application's specified source files; if this rule is executed by
# make, the input source file doens't exist and an error needs to be presented to the user
$(SRC):
$(error Source file does not exist: $@)
# Compiles an input C source file and generates an assembly listing for it
%.s: %.c $(MAKEFILE_LIST) %.s: %.c $(MAKEFILE_LIST)
@echo $(MSG_COMPILE_CMD) Generating assembly from C file \"$(notdir $<)\" @echo $(MSG_COMPILE_CMD) Generating assembly from C file \"$(notdir $<)\"
$(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) $< -o $@ $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) $< -o $@
# Compiles an input C++ source file and generates an assembly listing for it
%.s: %.cpp $(MAKEFILE_LIST) %.s: %.cpp $(MAKEFILE_LIST)
@echo $(MSG_COMPILE_CMD) Generating assembly from C++ file \"$(notdir $<)\" @echo $(MSG_COMPILE_CMD) Generating assembly from C++ file \"$(notdir $<)\"
$(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) $< -o $@ $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) $< -o $@
# Compiles an input C source file and generates a linkable object file for it
$(OBJDIR)/%.o: %.c $(MAKEFILE_LIST) $(OBJDIR)/%.o: %.c $(MAKEFILE_LIST)
@echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\" @echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\"
$(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
# Compiles an input C++ source file and generates a linkable object file for it
$(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST) $(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST)
@echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\" @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\"
$(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
# Assembles an input ASM source file and generates a linkable object file for it
$(OBJDIR)/%.o: %.S $(MAKEFILE_LIST) $(OBJDIR)/%.o: %.S $(MAKEFILE_LIST)
@echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\" @echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\"
$(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
# Generates a library archive file from the user application, which can be linked into other applications
.PRECIOUS : $(OBJECT_FILES) .PRECIOUS : $(OBJECT_FILES)
.SECONDARY : %.a .SECONDARY : %.a
%.a: $(OBJECT_FILES) %.a: $(OBJECT_FILES)
@echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\" @echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\"
$(CROSS)-ar rcs $@ $(OBJECT_FILES) $(CROSS)-ar rcs $@ $(OBJECT_FILES)
# Generates an ELF debug file from the user application, which can be further processed for FLASH and EEPROM data
# files, or used for programming and debugging directly
.PRECIOUS : $(OBJECT_FILES) .PRECIOUS : $(OBJECT_FILES)
.SECONDARY : %.elf .SECONDARY : %.elf
%.elf: $(OBJECT_FILES) %.elf: $(OBJECT_FILES)
@echo $(MSG_LINK_CMD) Linking object files into \"$@\" @echo $(MSG_LINK_CMD) Linking object files into \"$@\"
$(CROSS)-gcc $(BASE_LD_FLAGS) $(LD_FLAGS) $^ -o $@ $(CROSS)-gcc $(BASE_LD_FLAGS) $(LD_FLAGS) $^ -o $@
# Extracts out the loadable FLASH memory data from the project ELF file, and creates an Intel HEX format file of it
%.hex: %.elf %.hex: %.elf
@echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\" @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
$(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@ $(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
# Extracts out the loadable EEPROM memory data from the project ELF file, and creates an Intel HEX format file of it
%.eep: %.elf %.eep: %.elf
@echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\" @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
$(CROSS)-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0 $(CROSS)-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
# Creates an assembly listing file from an input project ELF file, containing interleaved assembly and source data
%.lss: %.elf %.lss: %.elf
@echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\" @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
$(CROSS)-objdump -h -S -z $< > $@ $(CROSS)-objdump -h -S -z $< > $@
# Creates a symbol file listing the loadable and discarded symbols from an input project ELF file
%.sym: %.elf %.sym: %.elf
@echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\" @echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\"
$(CROSS)-nm -n $< > $@ $(CROSS)-nm -n $< > $@
......
...@@ -133,22 +133,28 @@ help: ...@@ -133,22 +133,28 @@ help:
@echo "===================================================================" @echo "==================================================================="
@echo " The LUFA BuildSystem 2.0 - Powered By Duct Tape (tm) " @echo " The LUFA BuildSystem 2.0 - Powered By Duct Tape (tm) "
@echo "===================================================================" @echo "==================================================================="
# Lists build modules included by the project makefile, in alphabetical order
list_modules: list_modules:
@echo Currently Used Build System Modules: $(PRINTABLE_LUFA_BUILD_MODULES) @echo Currently Used Build System Modules: $(PRINTABLE_LUFA_BUILD_MODULES)
# Lists build targets included by the project makefile, in alphabetical order
list_targets: list_targets:
@echo Currently Available Build Targets: $(PRINTABLE_LUFA_BUILD_TARGETS) @echo Currently Available Build Targets: $(PRINTABLE_LUFA_BUILD_TARGETS)
# Lists mandatory variables that must be set by the project makefile, in alphabetical order
list_mandatory: list_mandatory:
@echo Mandatory Variables for Included Modules: $(PRINTABLE_LUFA_MANDATORY_VARS) @echo Mandatory Variables for Included Modules: $(PRINTABLE_LUFA_MANDATORY_VARS)
# Lists optional variables that must be set by the project makefile, in alphabetical order
list_optional: list_optional:
@echo Optional Variables for Included Modules: $(PRINTABLE_LUFA_OPTIONAL_VARS) @echo Optional Variables for Included Modules: $(PRINTABLE_LUFA_OPTIONAL_VARS)
# Lists variables provided by the included build modules, in alphabetical order
list_provided: list_provided:
@echo Variables Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_VARS) @echo Variables Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_VARS)
# Lists macros provided by the included build modules, in alphabetical order
list_macros: list_macros:
@echo Macros Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_MACROS) @echo Macros Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_MACROS)
......
...@@ -92,10 +92,12 @@ endif ...@@ -92,10 +92,12 @@ endif
# Output Messages # Output Messages
MSG_CPPCHECK_CMD := ' [CPPCHECK]:' MSG_CPPCHECK_CMD := ' [CPPCHECK]:'
# Checks the CPPCheck configuration as used in the user project, to determine if any paths are missing or invalid
cppcheck-config: cppcheck-config:
@echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files
cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC) cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC)
# Runs a static analysis using CPPCheck to determine if there are any issues
cppcheck: cppcheck:
@echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files
cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC) cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC)
......
...@@ -62,12 +62,14 @@ MSG_COPY_CMD := ' [CP] :' ...@@ -62,12 +62,14 @@ MSG_COPY_CMD := ' [CP] :'
MSG_REMOVE_CMD := ' [RM] :' MSG_REMOVE_CMD := ' [RM] :'
MSG_DFU_CMD := ' [DFU] :' MSG_DFU_CMD := ' [DFU] :'
# Programs in the target FLASH memory using BATCHISP, the command line tool used by FLIP
flip: $(TARGET).hex $(MAKEFILE_LIST) flip: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\" @echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\"
batchisp -hardware usb -device $(MCU) -operation erase f batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $< program batchisp -hardware usb -device $(MCU) -operation loadbuffer $< program
batchisp -hardware usb -device $(MCU) -operation start reset 0 batchisp -hardware usb -device $(MCU) -operation start reset 0
# Programs in the target EEPROM memory using BATCHISP, the command line tool used by FLIP
flip-ee: $(TARGET).eep $(MAKEFILE_LIST) flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
@echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\" @echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\"
cp $< $<.hex cp $< $<.hex
...@@ -78,12 +80,14 @@ flip-ee: $(TARGET).eep $(MAKEFILE_LIST) ...@@ -78,12 +80,14 @@ flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
@echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\" @echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\"
rm $<.hex rm $<.hex
# Programs in the target FLASH memory using DFU-PROGRAMMER
dfu: $(TARGET).hex $(MAKEFILE_LIST) dfu: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\" @echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\"
dfu-programmer $(MCU) erase dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash $< dfu-programmer $(MCU) flash $<
dfu-programmer $(MCU) reset dfu-programmer $(MCU) reset
# Programs in the target EEPROM memory using DFU-PROGRAMMER
dfu-ee: $(TARGET).eep $(MAKEFILE_LIST) dfu-ee: $(TARGET).eep $(MAKEFILE_LIST)
@echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\" @echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\"
dfu-programmer $(MCU) eeprom-flash $< dfu-programmer $(MCU) eeprom-flash $<
......
...@@ -73,6 +73,7 @@ else ...@@ -73,6 +73,7 @@ else
DOXYGEN_CMD := $(BASE_DOXYGEN_CMD) DOXYGEN_CMD := $(BASE_DOXYGEN_CMD)
endif endif
# Builds the project documentation using the specified configuration file and the DOXYGEN tool
doxygen: doxygen:
@echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\" @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
$(DOXYGEN_CMD) $(DOXYGEN_CMD)
......
...@@ -64,20 +64,24 @@ MSG_HID_BOOTLOADER_CMD := ' [HID] :' ...@@ -64,20 +64,24 @@ MSG_HID_BOOTLOADER_CMD := ' [HID] :'
MSG_OBJCPY_CMD := ' [OBJCPY] :' MSG_OBJCPY_CMD := ' [OBJCPY] :'
MSG_MAKE_CMD := ' [MAKE] :' MSG_MAKE_CMD := ' [MAKE] :'
# Programs in the target FLASH memory using the HID_BOOTLOADER_CLI tool
hid: $(TARGET).hex $(MAKEFILE_LIST) hid: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with hid_bootloader_cli using \"$<\" @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with hid_bootloader_cli using \"$<\"
hid_bootloader_cli -mmcu=$(MCU) -v $< hid_bootloader_cli -mmcu=$(MCU) -v $<
# Programs in the target EEPROM memory using the HID_BOOTLOADER_CLI tool (note: clears target FLASH memory)
hid-ee: $(TARGET).eep $(MAKEFILE_LIST) hid-ee: $(TARGET).eep $(MAKEFILE_LIST)
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\"
avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin
@echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\" @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\"
make -C $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/ MCU=$(MCU) clean hid make -C $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/ MCU=$(MCU) clean hid
# Programs in the target FLASH memory using the TEENSY_BOOTLOADER_CLI tool
teensy: $(TARGET).hex $(MAKEFILE_LIST) teensy: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with teensy_loader_cli using \"$<\" @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with teensy_loader_cli using \"$<\"
teensy_loader_cli -mmcu=$(MCU) -v $< teensy_loader_cli -mmcu=$(MCU) -v $<
# Programs in the target EEPROM memory using the TEENSY_BOOTLOADER_CLI tool (note: clears target FLASH memory)
teensy-ee: $(TARGET).hex $(MAKEFILE_LIST) teensy-ee: $(TARGET).hex $(MAKEFILE_LIST)
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\"
avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin
......
...@@ -105,6 +105,10 @@ ...@@ -105,6 +105,10 @@
* <td><tt>mostlyclean</tt></td> * <td><tt>mostlyclean</tt></td>
* <td>Remove all intermediatary files but preserve any binary output files.</td> * <td>Remove all intermediatary files but preserve any binary output files.</td>
* </tr> * </tr>
* <tr>
* <td><tt><filename>.s</tt></td>
* <td>Create an assembly listing of a given input C/C++ source file.</td>
* </tr>
* </table> * </table>
* *
* \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment