Commit 7e7124e4 authored by Dean Camera's avatar Dean Camera
Browse files

Updated makefiles to reflect new dfu-ee programming target invocations...

Updated makefiles to reflect new dfu-ee programming target invocations (supplied by Opendous, Inc.).

Renamed the ATTR_ALWAYSINLINE function attribute macro to ATTR_ALWAYS_INLINE to match the style of the other function attribute macro names.

Added ATTR_ALWAYS_INLINE attribute to several inlined library functions, to ensure they are inlined in all circumstances.

Cleanups to Endpoint.h and Pipe.h. Added better documentation for the endpoint and pipe interrupts.
parent 5e787a4b
......@@ -32,18 +32,6 @@
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
......@@ -527,26 +515,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
......
......@@ -32,18 +32,6 @@
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
......@@ -527,27 +515,8 @@ gccversion :
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
......
......@@ -32,18 +32,6 @@
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
......@@ -527,26 +515,6 @@ gccversion :
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
copy $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
......
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -62,9 +62,9 @@ TASK_LIST
Bluetooth_Device_t Bluetooth_DeviceConfiguration =
{
Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM),
Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM),
PINCode: "0000",
Name: "LUFA Bluetooth Demo"
Name: "LUFA Bluetooth Demo"
};
......
......@@ -540,10 +540,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -677,15 +677,16 @@ $(OBJDIR)/%.o : %.S
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
## Target: clean project.
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -698,11 +699,15 @@ clean_list:
$(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
......@@ -716,4 +721,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
## Target: clean project.
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -615,6 +615,8 @@ extcoff: $(TARGET).elf
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
......@@ -674,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -712,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -536,10 +536,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -678,10 +678,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -716,4 +717,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -533,10 +533,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -675,10 +675,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -713,4 +714,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
## Target: clean project.
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
## Target: clean project.
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -539,10 +539,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,15 +676,16 @@ $(OBJDIR)/%.o : %.S
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
## Target: clean project.
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -719,4 +720,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
......@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
......@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
gdb-config doxygen dfu flip
gdb-config doxygen dfu flip flip-ee dfu-ee
......@@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
<