Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the...

Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).

Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).

Bootloaders/TeensyHID/TeensyHID.c

@@ -33,7 +33,6 @@
  *  Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic.
  */
  
-#define  INCLUDE_FROM_TEENSYHID_C
 #include "TeensyHID.h"
 
 /* Global Variables: */

LUFA/Drivers/USB/HighLevel/USBInterrupt.c

@@ -93,7 +93,10 @@ ISR(USB_GEN_vect, ISR_BLOCK)
 		
 			USB_Detach();
 			USB_CLK_Freeze();
-			USB_PLL_Off();
+
+			if (!(USB_Options & USB_OPT_MANUAL_PLL))
+			  USB_PLL_Off();
+
 			USB_REG_Off();
 
 			EVENT_USB_VBUSDisconnect();

LUFA/Drivers/USB/LowLevel/Device.h

@@ -185,7 +185,7 @@
 	#if !defined(__DOXYGEN__)
 		/* Macros: */		
 			#define USB_Device_SetLowSpeed()        MACROS{ UDCON |=  (1 << LSM);   }MACROE
-			#define USB_Device_SetHighSpeed()       MACROS{ UDCON &= ~(1 << LSM);   }MACROE
+			#define USB_Device_SetFullSpeed()       MACROS{ UDCON &= ~(1 << LSM);   }MACROE
 	#endif
 
 #endif

LUFA/Drivers/USB/LowLevel/LowLevel.c

@@ -121,7 +121,9 @@ void USB_ShutDown(void)
 	USB_ResetInterface();
 	USB_Detach();
 	USB_Controller_Disable();
-	USB_PLL_Off();
+	
+	if (!(USB_Options & USB_OPT_MANUAL_PLL))
+	  USB_PLL_Off();
 	
 	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
 	USB_OTGPAD_Off();
@@ -188,7 +190,7 @@ void USB_ResetInterface(void)
 		if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
 		  USB_Device_SetLowSpeed();
 		else
-		  USB_Device_SetHighSpeed();
+		  USB_Device_SetFullSpeed();
 		  
 		USB_INT_Enable(USB_INT_VBUS);
 	}

LUFA/ManPages/ChangeLog.txt

@@ -64,6 +64,7 @@
   *    to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data
   *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is
   *    cleared to prevent endpoint type corruption
+  *  - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)
   *  - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()
   *  - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)
   *  - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use