Commit aa640330 authored by Dean Camera's avatar Dean Camera
Browse files

Finish Class Driver MouseHost demo. Update HID Host Class driver; boot...

Finish Class Driver MouseHost demo. Update HID Host Class driver; boot protocol now works, still need to finish and test report protocol mode.
parent 51566d1a
......@@ -115,10 +115,16 @@ int main(void)
{
USB_MouseReport_Data_t MouseReport;
uint8_t ReportID = 0;
uint8_t LEDMask = LEDS_NO_LEDS;
uint8_t LEDMask = LEDS_NO_LEDS;
/* Receive next boot protocol mouse report from the device */
HID_Host_ReceiveReport(&Mouse_HID_Interface, false, &ReportID, &MouseReport);
/* Print mouse report data through the serial port */
printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
MouseReport.Y,
MouseReport.Button);
/* Alter status LEDs according to mouse X movement */
if (MouseReport.X > 0)
LEDMask |= LEDS_LED1;
......@@ -134,13 +140,9 @@ int main(void)
/* Alter status LEDs according to mouse button position */
if (MouseReport.Button)
LEDMask = LEDS_ALL_LEDS;
LEDs_SetAllLEDs(LEDMask);
}
else
{
LEDs_SetAllLEDs(LEDS_NO_LEDS);
}
break;
}
......
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Host Demo
*
* \section SSec_Compat Demo Compatibility:
*
* The following table indicates what microcontrollers are compatible with this demo.
*
* - AT90USB1287
* - AT90USB647
*
* \section SSec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Usable Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section SSec_Description Project Description:
*
* Mouse host demonstration application. This gives a simple reference
* application for implementing a USB Mouse host, for USB mice using
* the standard mouse HID profile.
*
* Mouse movement and button presses are displayed on the board LEDs,
* as well as printed out the serial terminal as formatted dY, dY and
* button status information.
*
* This uses a naive method where the mouse is set to Boot Protocol mode, so
* that the report structure is fixed and known. A better implementation
* uses the HID report parser for correct report data processing across
* all compatible mice with advanced characteristics, as shown in the
* MouseHostWithParser demo application.
*
* Currently only single interface mice are supported.
*
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/
This diff is collapsed.
......@@ -75,7 +75,7 @@ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo, uint
if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
DComp_HID_Host_NextHIDInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
{
if (FoundEndpoints == (1 << HID_FOUND_DATAPIPE_IN))
if (FoundEndpoints & HID_FOUND_DATAPIPE_IN)
break;
return HID_ENUMERROR_EndpointsNotFound;
......@@ -199,7 +199,8 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo, bool
if ((ErrorCode = Pipe_Read_Stream_LE(Buffer, ReportSize, NO_STREAM_CALLBACK)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
Pipe_ClearIN();
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
......@@ -239,6 +240,7 @@ uint8_t HID_Host_SendReport(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo, uint8_t
if ((ErrorCode = Pipe_Write_Stream_LE(Buffer, ReportSize, NO_STREAM_CALLBACK)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
Pipe_ClearOUT();
Pipe_Freeze();
return PIPE_RWSTREAM_NoError;
......@@ -255,7 +257,7 @@ bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo)
Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipeNumber);
Pipe_Unfreeze();
ReportReceived = Pipe_IsReadWriteAllowed();
ReportReceived = Pipe_IsINReceived();
Pipe_Freeze();
......@@ -264,16 +266,13 @@ bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo)
uint8_t USB_HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo)
{
if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
return false;
uint8_t ErrorCode;
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 1,
.wValue = 0,
.wIndex = HIDInterfaceInfo->State.InterfaceNumber,
.wLength = 0,
};
......@@ -293,9 +292,6 @@ uint8_t USB_HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo)
uint8_t USB_HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo)
{
if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
return false;
uint8_t ErrorCode;
uint8_t HIDReportData[HIDInterfaceInfo->State.HIDReportSize];
......@@ -318,7 +314,7 @@ uint8_t USB_HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* HIDInterfaceInf
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SetProtocol,
.wValue = 0,
.wValue = 1,
.wIndex = HIDInterfaceInfo->State.InterfaceNumber,
.wLength = 0,
};
......
......@@ -246,21 +246,21 @@ uint8_t USB_ProcessHIDReport(const uint8_t* ReportData, uint16_t ReportSize, HID
{
case TAG_MAIN_INPUT:
NewReportItem.ItemType = REPORT_ITEM_TYPE_In;
NewReportItem.BitOffset = CurrReportIDInfo->BitsIn;
NewReportItem.BitOffset = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_In];
CurrReportIDInfo->BitsIn += CurrStateTable->Attributes.BitSize;
CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_In] += CurrStateTable->Attributes.BitSize;
break;
case TAG_MAIN_OUTPUT:
NewReportItem.ItemType = REPORT_ITEM_TYPE_Out;
NewReportItem.BitOffset = CurrReportIDInfo->BitsOut;
NewReportItem.BitOffset = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Out];
CurrReportIDInfo->BitsOut += CurrStateTable->Attributes.BitSize;
CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Out] += CurrStateTable->Attributes.BitSize;
break;
case TAG_MAIN_FEATURE:
NewReportItem.ItemType = REPORT_ITEM_TYPE_Feature;
NewReportItem.BitOffset = CurrReportIDInfo->BitsFeature;
NewReportItem.BitOffset = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Feature];
CurrReportIDInfo->BitsFeature += CurrStateTable->Attributes.BitSize;
CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Feature] += CurrStateTable->Attributes.BitSize;
break;
}
......@@ -347,17 +347,7 @@ uint16_t USB_GetHIDReportSize(HID_ReportInfo_t* const ParserData, uint8_t Report
for (uint8_t i = 0; i < HID_MAX_REPORT_IDS; i++)
{
if (ParserData->ReportIDSizes[i].ReportID == ReportID)
{
switch (ReportType)
{
case REPORT_ITEM_TYPE_In:
return ParserData->ReportIDSizes[i].BitsIn;
case REPORT_ITEM_TYPE_Out:
return ParserData->ReportIDSizes[i].BitsOut;
case REPORT_ITEM_TYPE_Feature:
return ParserData->ReportIDSizes[i].BitsFeature;
}
}
return ParserData->ReportIDSizes[i].ReportSizeBits[ReportType];
}
return 0;
......
......@@ -208,9 +208,9 @@
typedef struct
{
uint8_t ReportID; /** Report ID of the report within the HID interface */
uint8_t BitsIn; /** Total number of IN data bits in the current report ID */
uint8_t BitsOut; /** Total number of OUT data bits in the current report ID */
uint8_t BitsFeature; /** Total number of FEATURE data bits in the current report ID */
uint8_t ReportSizeBits[3]; /** Total number of bits in each report type for the given Report ID,
* indexed by the \ref HID_ReportItemTypes_t enum
*/
} HID_ReportSizeInfo_t;
/** Type define for a complete processed HID report, including all report item data and collections. */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment