Commit c6f21fde authored by Dean Camera's avatar Dean Camera
Browse files

Speed up Webserver demo data rate by not sending a full ethernet frame each...

Speed up Webserver demo data rate by not sending a full ethernet frame each time, preventing the receiver from using a delayed ACK scheme which slows down the connection. TELNET server cleanup.
parent 8154331d
......@@ -62,31 +62,3 @@ DRESULT disk_write (
return RES_OK;
}
#endif /* _READONLY */
/*-----------------------------------------------------------------------*/
/* Miscellaneous Functions */
DRESULT disk_ioctl (
BYTE drv, /* Physical drive nmuber (0..) */
BYTE ctrl, /* Control code */
void *buff /* Buffer to send/receive control data */
)
{
if (ctrl == CTRL_SYNC)
return RES_OK;
else
return RES_PARERR;
}
DWORD get_fattime (void)
{
return ((DWORD)1 << 25) |
((DWORD)1 << 21) |
((DWORD)1 << 16) |
((DWORD)1 << 11) |
((DWORD)1 << 5) |
((DWORD)1 << 0);
}
......@@ -5,7 +5,7 @@
#ifndef _DISKIO
#define _READONLY 0 /* 1: Read-only mode */
#define _USE_IOCTL 1
#define _USE_IOCTL 0
#include "integer.h"
#include "ff.h"
......
......@@ -31,7 +31,7 @@
/** \file
*
* Simple HTTP Webserver Application. When connected to the uIP stack,
* this will serve out files to HTTP clients.
* this will serve out files to HTTP clients on port 80.
*/
#define INCLUDE_FROM_HTTPSERVERAPP_C
......@@ -270,8 +270,12 @@ static void HTTPServerApp_SendData(void)
uip_tcp_appstate_t* const AppState = &uip_conn->appstate;
char* const AppData = (char*)uip_appdata;
/* Must determine the maximum segment size to determine maximum file chunk size */
uint16_t MaxSegmentSize = uip_mss();
/* Must determine the maximum segment size to determine maximum file chunk size - never send a completely
* full packet, as this will cause some hosts to start delaying ACKs until a non-full packet is received.
* since uIP only allows one packet to be in transit at a time, this would cause long delays between packets
* until the host times out and sends the ACK for the last received packet.
*/
uint16_t MaxSegmentSize = (uip_mss() >> 1);
/* Return file pointer to the last ACKed position */
f_lseek(&AppState->HTTPServer.FileHandle, AppState->HTTPServer.ACKedFilePos);
......
......@@ -31,7 +31,7 @@
/** \file
*
* TELNET Webserver Application. When connected to the uIP stack,
* this will serve out connection information to the client.
* this will serve out raw TELNET to the client on port 23.
*/
#define INCLUDE_FROM_TELNETSERVERAPP_C
......@@ -44,9 +44,13 @@ const char PROGMEM WelcomeHeader[] = "******************************************
/** Main TELNET menu, giving the user the list of available commands they may issue */
const char PROGMEM TELNETMenu[] = "\r\n"
" Available Commands:\r\n"
" == Available Commands: ==\r\n"
" c) List Active TCP Connections\r\n"
"\r\nCommand>";
" =========================\r\n"
"\r\n>";
/** Header to print before the current connections are printed to the client */
const char PROGMEM CurrentConnectionsHeader = "\r\n* Current TCP Connections: *\r\n";
/** Initialization function for the simple HTTP webserver. */
void TELNETServerApp_Init(void)
......@@ -65,11 +69,13 @@ void TELNETServerApp_Callback(void)
if (uip_connected())
{
/* New connection - initialize connection state values */
AppState->TELNETServer.CurrentState = TELNET_STATE_SendHeader;
}
if (uip_acked())
{
/* Progress to the next state once the current state's data has been ACKed */
AppState->TELNETServer.CurrentState = AppState->TELNETServer.NextState;
}
......@@ -124,7 +130,7 @@ static void TELNETServerApp_DisplayTCPConnections(void)
{
char* const AppData = (char*)uip_appdata;
strcpy(AppData, "\r\n* Current TCP Connections: *\r\n");
strcpy_P(AppData, CurrentConnectionsHeader);
uint16_t ResponseLen = strlen(AppData);
uint8_t ActiveConnCount = 0;
......
......@@ -691,7 +691,7 @@ typedef union
uint8_t CurrentState;
uint8_t NextState;
char FileName[50];
char FileName[MAX_URI_LENGTH];
FIL FileHandle;
bool FileOpen;
uint32_t ACKedFilePos;
......
......@@ -55,7 +55,7 @@
* To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage device. Load
* HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called
* <i>index.htm</i>. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total
* requested file path must be equal to or less than 50 characters (set in uipopt.h).
* requested file path must be equal to or less than the maximum URI length (\see \ref SSec_Options).
*
* When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the
* appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80 and TELNET
......@@ -98,5 +98,10 @@
* <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT
* is not defined).</td>
* </tr>
* <tr>
* <td>MAX_URI_LENGTH</td>
* <td>Makefile CDEFS</td>
* <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and seperators.</td>
* </tr>
* </table>
*/
\ No newline at end of file
......@@ -200,8 +200,9 @@ CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DENABLE_DHCP_CLIENT
CDEFS += -DMAX_URI_LENGTH=50
CDEFS += -DUIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT)" -DUIP_CONF_TCP=1 -DUIP_CONF_UDP_CONNS=1 -DUIP_CONF_MAX_CONNECTIONS=5
CDEFS += -DUIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT)" -DUIP_CONF_TCP=1 -DUIP_CONF_UDP_CONNS=1 -DUIP_CONF_MAX_CONNECTIONS=3
CDEFS += -DUIP_CONF_MAX_LISTENPORTS=5 -DUIP_URGDATA=0 -DUIP_CONF_BUFFER_SIZE=1514 -DUIP_ARCH_CHKSUM=0
CDEFS += -DUIP_CONF_LL_802154=0 -DUIP_CONF_LL_80211=0 -DUIP_CONF_ROUTER=0 -DUIP_CONF_ICMP6=0
CDEFS += -DUIP_ARCH_ADD32=0 -DUIP_CONF_ICMP_DEST_UNREACH=1 -DUIP_NEIGHBOR_CONF_ADDRTYPE=0
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment