Commit ce260ae7 authored by Dean Camera's avatar Dean Camera
Browse files

Webserver project now uses the board LEDs to indicate the current IP configuration state.

Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.
parent a61c7f67
......@@ -16,6 +16,7 @@
* for PDI and TPI programming
* - Increased the speed of both software and hardware TPI/PDI programming modes of the AVRISP project
* - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond
* - Webserver project now uses the board LEDs to indicate the current IP configuration state
*
* <b>Fixed:</b>
* - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
......
......@@ -24,6 +24,7 @@
* - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
* - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569
* - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
* - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/
* - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
* - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
*
......
......@@ -41,8 +41,6 @@ DRESULT disk_readp (
ErrorCode = RES_NOTRDY;
else if (MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp))
ErrorCode = RES_ERROR;
MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp);
#endif
}
else
......
......@@ -156,7 +156,10 @@ void DHCPClientApp_Callback(void)
uip_setnetmask((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.Netmask);
uip_setdraddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.GatewayIP);
AppState->DHCPClient.CurrentState = DHCP_STATE_AddressLeased;
/* Indicate to the user that we now have a valid IP configuration */
HaveIPConfiguration = true;
AppState->DHCPClient.CurrentState = DHCP_STATE_AddressLeased;
}
break;
......
......@@ -77,7 +77,7 @@ const MIME_Type_t MIMETypes[] =
{.Extension = "pdf", .MIMEType = "application/pdf"},
};
/** FAT Fs structure to hold the internal state of the FAT driver for the dataflash contents. */
/** FATFs structure to hold the internal state of the FAT driver for the dataflash contents. */
FATFS DiskFATState;
......
......@@ -46,6 +46,7 @@ struct timer ARPTimer;
/** MAC address of the RNDIS device, when enumerated */
struct uip_eth_addr MACAddress;
bool HaveIPConfiguration;
/** Configures the uIP stack ready for network traffic. */
void uIPManagement_Init(void)
......@@ -62,8 +63,10 @@ void uIPManagement_Init(void)
/* DHCP/Server IP Settings Initialization */
#if defined(ENABLE_DHCP_CLIENT)
HaveIPConfiguration = false;
DHCPClientApp_Init();
#else
HaveIPConfiguration = true;
uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress;
uip_ipaddr(&IPAddress, DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]);
uip_ipaddr(&Netmask, DEVICE_NETMASK[0], DEVICE_NETMASK[1], DEVICE_NETMASK[2], DEVICE_NETMASK[3]);
......@@ -169,7 +172,7 @@ static void uIPManagement_ProcessIncomingPacket(void)
}
}
LEDs_SetAllLEDs(LEDMASK_USB_READY);
LEDs_SetAllLEDs(LEDMASK_USB_READY | ((HaveIPConfiguration) ? LEDMASK_UIP_READY : LEDMASK_UIP_READY_NOCONFIG));
}
/** Manages the currently open network connections, including TCP and (if enabled) UDP. */
......
......@@ -63,6 +63,8 @@
/* External Variables: */
extern struct uip_eth_addr MACAddress;
extern bool HaveIPConfiguration;
/* Function Prototypes: */
void uIPManagement_Init(void);
void uIPManagement_ManageNetwork(void);
......
......@@ -53,19 +53,25 @@
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
#define LEDMASK_USB_ENUMERATING (LEDS_LED1 | LEDS_LED2)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
#define LEDMASK_USB_READY LEDS_LED2
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
#define LEDMASK_USB_BUSY (LEDS_LED1 | LEDS_LED3 | LEDS_LED4)
/** LED mask for the uIP stack idling with no IP configuration */
#define LEDMASK_UIP_READY_NOCONFIG LEDS_LED3
/** LED mask for the uIP stack idling with a valid IP configuration */
#define LEDMASK_UIP_READY_CONFIG LEDS_LED4
/* Function Prototypes: */
void SetupHardware(void);
......
......@@ -13,18 +13,14 @@
# "make doxygen" to document everything with DoxyGen (if installed) and
# "make clean_doxygen" to remove generated Doxygen documentation from everything.
# It is suggested that for the master build, the --quiet switch is passed to make,
# to remove all the commands from the output. This gives a much easier to read
# report of the entire build process.
all:
%:
@echo Executing \"make $@\" on all LUFA library elements.
@echo
make -C LUFA/ $@
make -C Demos/ $@
make -C Projects/ $@
make -C Bootloaders/ $@
make -C LUFA/ $@ -s
make -C Demos/ $@ -s
make -C Projects/ $@ -s
make -C Bootloaders/ $@ -s
@echo
@echo LUFA \"make $@\" operation complete.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment