Skip to content

GitLab

Commit ceb68a06 authored by Dean Camera's avatar Dean Camera
Browse files

Corrected CDC class bootloader to fix a few bugs, changed address counter to... 

Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience.
parent 904ad3ab
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 116 additions and 110 deletions
Bootloaders/CDC/BootloaderCDC.c
View file @ ceb68a06
......@@ -52,7 +52,7 @@ CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
* and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued
* command.)
*/
uint16_t CurrAddress;
uint32_t CurrAddress;
/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
* via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application
......@@ -223,101 +223,101 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
MemoryType = FetchNextCommandByte();
if ((MemoryType == 'E') || (MemoryType == 'F'))
if ((MemoryType != 'E') && (MemoryType != 'F'))
{
/* Check if command is to read memory */
if (Command == 'g')
{
/* Re-enable RWW section */
boot_rww_enable();
/* Send error byte back to the host */
WriteNextResponseByte('?');
return;
}
while (BlockSize--)
/* Check if command is to read memory */
if (Command == 'g')
{
/* Re-enable RWW section */
boot_rww_enable();
while (BlockSize--)
{
if (MemoryType == 'E')
{
if (MemoryType == 'E')
{
/* Read the next EEPROM byte into the endpoint */
WriteNextResponseByte(eeprom_read_byte((uint8_t*)CurrAddress));
/* Read the next EEPROM byte into the endpoint */
WriteNextResponseByte(eeprom_read_byte((uint8_t*)(uint16_t)(CurrAddress >> 1)));
/* Increment the address counter after use */
CurrAddress++;
}
else
{
/* Read the next FLASH byte from the current FLASH page */
#if defined(RAMPZ)
WriteNextResponseByte(pgm_read_byte_far(((uint32_t)CurrAddress << 1) + HighByte));
#else
WriteNextResponseByte(pgm_read_byte((CurrAddress << 1) + HighByte));
#endif
/* If both bytes in current word have been read, increment the address counter */
if (HighByte)
CurrAddress++;
HighByte ^= 1;
}
/* Increment the address counter after use */
CurrAddress += 2;
}
else
{
/* Read the next FLASH byte from the current FLASH page */
#if defined(RAMPZ)
WriteNextResponseByte(pgm_read_byte_far(CurrAddress | HighByte));
#else
WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte));
#endif
/* If both bytes in current word have been read, increment the address counter */
if (HighByte)
CurrAddress += 2;
HighByte = !HighByte;
}
}
else
}
else
{
uint32_t PageStartAddress = CurrAddress;
if (MemoryType == 'F')
{
boot_page_erase(PageStartAddress);
boot_spm_busy_wait();
}
while (BlockSize--)
{
uint32_t PageStartAddress = ((uint32_t)CurrAddress << 1);
if (MemoryType == 'F')
{
boot_page_erase(PageStartAddress);
boot_spm_busy_wait();
}
while (BlockSize--)
{
if (MemoryType == 'E')
{
/* If both bytes in current word have been written, increment the address counter */
if (HighByte)
{
/* Write the next EEPROM byte from the endpoint */
eeprom_write_byte((uint8_t*)CurrAddress, FetchNextCommandByte());
/* Write the next FLASH word to the current FLASH page */
boot_page_fill(CurrAddress, ((FetchNextCommandByte() << 8) | LowByte));
/* Increment the address counter after use */
CurrAddress++;
CurrAddress += 2;
HighByte = false;
}
else
{
/* If both bytes in current word have been written, increment the address counter */
if (HighByte)
{
/* Write the next FLASH word to the current FLASH page */
boot_page_fill(((uint32_t)CurrAddress << 1), ((FetchNextCommandByte() << 8) | LowByte));
HighByte = false;
/* Increment the address counter after use */
CurrAddress++;
}
else
{
LowByte = FetchNextCommandByte();
HighByte = true;
}
{
LowByte = FetchNextCommandByte();
HighByte = true;
}
}
/* If in FLASH programming mode, commit the page after writing */
if (MemoryType == 'F')
else
{
/* Commit the flash page to memory */
boot_page_write(PageStartAddress);
/* Wait until write operation has completed */
boot_spm_busy_wait();
/* Write the next EEPROM byte from the endpoint */
eeprom_write_byte((uint8_t*)(uint16_t)(CurrAddress >> 1), FetchNextCommandByte());
/* Increment the address counter after use */
CurrAddress += 2;
}
/* Send response byte back to the host */
WriteNextResponseByte('\r');
}
}
else
{
/* Send error byte back to the host */
WriteNextResponseByte('?');
/* If in FLASH programming mode, commit the page after writing */
if (MemoryType == 'F')
{
/* Commit the flash page to memory */
boot_page_write(PageStartAddress);
/* Wait until write operation has completed */
boot_spm_busy_wait();
}
/* Send response byte back to the host */
WriteNextResponseByte('\r');
}
}
......@@ -402,8 +402,8 @@ TASK(CDC_Task)
else if (Command == 'A')
{
/* Set the current address to that given by the host */
CurrAddress = (FetchNextCommandByte() << 8);
CurrAddress |= FetchNextCommandByte();
CurrAddress = (FetchNextCommandByte() << 9);
CurrAddress |= (FetchNextCommandByte() << 1);
/* Send confirmation byte back to the host */
WriteNextResponseByte('\r');
......@@ -426,9 +426,9 @@ TASK(CDC_Task)
}
else if (Command == 's')
{
WriteNextResponseByte(boot_signature_byte_get(4));
WriteNextResponseByte(boot_signature_byte_get(2));
WriteNextResponseByte(boot_signature_byte_get(0));
WriteNextResponseByte(SIGNATURE_0);
WriteNextResponseByte(SIGNATURE_1);
WriteNextResponseByte(SIGNATURE_2);
}
else if (Command == 'b')
{
......@@ -478,24 +478,29 @@ TASK(CDC_Task)
{
WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
}
else if ((Command == 'C') || (Command == 'c'))
{
if (Command == 'c')
{
/* Increment the address if the second byte is being written */
CurrAddress++;
}
else if (Command == 'C')
{
/* Write the high byte to the current flash page */
boot_page_fill(((uint32_t)CurrAddress << 1), FetchNextCommandByte());
boot_page_fill(CurrAddress, FetchNextCommandByte());
/* Send confirmation byte back to the host */
WriteNextResponseByte('\r');
}
else if (Command == 'c')
{
/* Write the low byte to the current flash page */
boot_page_fill(CurrAddress | 1, FetchNextCommandByte());
/* Increment the address */
CurrAddress += 2;
/* Send confirmation byte back to the host */
WriteNextResponseByte('\r');
}
else if (Command == 'm')
{
/* Commit the flash page to memory */
boot_page_write((uint32_t)CurrAddress << 1);
boot_page_write(CurrAddress);
/* Wait until write operation has completed */
boot_spm_busy_wait();
......@@ -511,9 +516,9 @@ TASK(CDC_Task)
else if (Command == 'R')
{
#if defined(RAMPZ)
uint16_t ProgramWord = pgm_read_word_far(((uint32_t)CurrAddress << 1));
uint16_t ProgramWord = pgm_read_word_far(CurrAddress);
#else
uint16_t ProgramWord = pgm_read_word(CurrAddress << 1);
uint16_t ProgramWord = pgm_read_word(CurrAddress);
#endif
WriteNextResponseByte(ProgramWord >> 8);
......@@ -522,10 +527,10 @@ TASK(CDC_Task)
else if (Command == 'D')
{
/* Read the byte from the endpoint and write it to the EEPROM */
eeprom_write_byte((uint8_t*)CurrAddress, FetchNextCommandByte());
eeprom_write_byte((uint8_t*)(uint16_t)(CurrAddress >> 1), FetchNextCommandByte());
/* Increment the address after use */
CurrAddress++;
CurrAddress += 2;
/* Send confirmation byte back to the host */
WriteNextResponseByte('\r');
......@@ -533,10 +538,10 @@ TASK(CDC_Task)
else if (Command == 'd')
{
/* Read the EEPROM byte and write it to the endpoint */
WriteNextResponseByte(eeprom_read_byte((uint8_t*)CurrAddress));
WriteNextResponseByte(eeprom_read_byte((uint8_t*)(uint16_t)(CurrAddress >> 1)));
/* Increment the address after use */
CurrAddress++;
CurrAddress += 2;
}
else if (Command == 27)
{
......
Bootloaders/DFU/BootloaderDFU.c
View file @ ceb68a06
......@@ -32,13 +32,6 @@
*
* Main source file for the DFU class bootloader. This file contains the complete bootloader logic.
*/
/** Configuration define. Define this token to true to case the bootloader to reject all memory commands
* until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this
* can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are
* allowed at any time.
*/
#define SECURE_MODE false
#define INCLUDE_FROM_BOOTLOADER_C
#include "BootloaderDFU.h"
......
Bootloaders/DFU/BootloaderDFU.h
View file @ ceb68a06
......@@ -50,6 +50,13 @@
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
/* Macros: */
/** Configuration define. Define this token to true to case the bootloader to reject all memory commands
* until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this
* can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are
* allowed at any time.
*/
#define SECURE_MODE false
/** Major bootloader version number. */
#define BOOTLOADER_VERSION_MINOR 2
......
Demos/Mouse/Mouse.c
View file @ ceb68a06
......@@ -113,6 +113,9 @@ EVENT_HANDLER(USB_Connect)
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
/* Default to report protocol on connect */
UsingReportProtocol = true;
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
......@@ -141,9 +144,6 @@ EVENT_HANDLER(USB_ConfigurationChanged)
/* Indicate USB connected and ready */
UpdateStatus(Status_USBReady);
/* Default to report protocol on connect */
UsingReportProtocol = true;
/* Start running mouse reporting task */
Scheduler_SetTaskMode(USB_Mouse_Report, TASK_RUN);
}
......
LUFA.pnproj
View file @ ceb68a06
This diff is collapsed.
LUFA/ChangeLog.txt
View file @ ceb68a06
......@@ -38,6 +38,7 @@
* - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy
* interfacing with a FAT library for dataflash file level access
* - Incomplete non-functional BluetoothHost demo removed until it has reached a stable state to prevent confusion
* - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience
*
* \section Sec_ChangeLog090209 Version 090209
*
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment