Commit e186907e authored by Dean Camera's avatar Dean Camera
Browse files

Fixed lengthy timeouts in the USBtoSerial project if no application on the...

Fixed lengthy timeouts in the USBtoSerial project if no application on the host is consuming data (thanks to Nicolas Saugnier).

Fixed lengthy automatic data flushing in the CDC and MIDI device class drivers.
parent 3e1f3869
......@@ -34,6 +34,8 @@
* - Library Applications:
* - Fixed broken RESET_TOGGLES_LIBUSB_COMPAT compile time option in the AVRISP-MKII project
* - Fixed incompatibility in the CDC class bootloader on some systems (thanks to Sylvain Munaut)
* - Fixed lengthy timeouts in the USBtoSerial project if no application on the host is consuming data (thanks to Nicolas Saugnier)
* - Fixed lengthy automatic data flushing in the CDC and MIDI device class drivers
*
* \section Sec_ChangeLog120730 Version 120730
* <b>New:</b>
......
......@@ -138,7 +138,10 @@ void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
return;
#if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
CDC_Device_Flush(CDCInterfaceInfo);
Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
if (Endpoint_IsINReady())
CDC_Device_Flush(CDCInterfaceInfo);
#endif
}
......
......@@ -59,7 +59,10 @@ void MIDI_Device_USBTask(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)
return;
#if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
MIDI_Device_Flush(MIDIInterfaceInfo);
Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address);
if (Endpoint_IsINReady())
MIDI_Device_Flush(MIDIInterfaceInfo);
#endif
}
......
......@@ -108,21 +108,32 @@ int main(void)
uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
if ((TIFR0 & (1 << TOV0)) || (BufferCount > (uint8_t)(sizeof(USARTtoUSB_Buffer_Data) * .75)))
{
/* Clear flush timer expiry flag */
TIFR0 |= (1 << TOV0);
/* Read bytes from the USART receive buffer into the USB IN endpoint */
while (BufferCount--)
Endpoint_SelectEndpoint(VirtualSerial_CDC_Interface.Config.DataINEndpoint.Address);
/* Check if a packet is already enqueued to the host - if so, we shouldn't try to send more data
* until it completes as there is a chance nothing is listening and a lengthy timeout could occur */
if (Endpoint_IsINReady())
{
/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
/* Clear flush timer expiry flag */
TIFR0 |= (1 << TOV0);
/* Never send more than one bank size less one byte to the host at a time, so that we don't block
* while a Zero Length Packet (ZLP) to terminate the transfer is sent if the host isn't listening */
uint8_t BytesToSend = MIN(BufferCount, (CDC_TXRX_EPSIZE - 1));
/* Read bytes from the USART receive buffer into the USB IN endpoint */
while (BytesToSend--)
{
break;
}
/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
{
break;
}
/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
RingBuffer_Remove(&USARTtoUSB_Buffer);
/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
RingBuffer_Remove(&USARTtoUSB_Buffer);
}
}
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment