Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.

Enhancements to the AVRISP Programmer project to attempt to get AVRStudio to communicate with the device.

Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.

Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.

Fix USBtoSerial device demos -- ensure the UDR1 register contents is read in under all circumstances which fire the ISR, so that the receive complete interrupt is cleared correctly to prevent freezes.

Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.

Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.

Minor updates to the unfinished SideShow demo for clarity.

Added unfinished MassStorageHost class driver demo.

SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested HID interface within the device, not all HID interfaces.

Apply correct fix to the HID report parser for PUSH items - current HID item attribute stack was being copied in the wrong direction.

Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered.

Minor documentation fixes.

Remove stray state variable from the CDC host class driver.

Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.

Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.

Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.

Make HID host class driver include the HID report parser.

Adjustments to the CDC and MIDI device class drivers to use sizeof() on the actual variable being transmitted or received rather than its datatype to reduce possible mistakes.

Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.

Further work on the new CDC and HID host mode class drivers.

Reset changelog et. al. to reset development information for the new version currently under development.

Cleanups to RNDIS device demos. Fix issue in RNDIS demos where the memory would become corrupted due to an incorrect bounds check when iterating over the port state table, causing random resets.

Revert change to Template_Endpoint_Control_R.c, which broke control stream reads.

Remove uneeded ADC.h include in the class driver AudioOutput demo.

Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.

Fix incorrect event name in MassStorageHost.c.

Simplify CDC device demos, by directly assigning the string to transmit to the pointer, rather than using an intermediatary table to hold all the possible transmit strings.

Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.

Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.

Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.

Removed unused relative Common.h header include from the DriverStubs board stub drivers.

Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.

Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.

Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.

Fix incorrect model compatibility information in the Host LowLevel demo overview text files.

Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.

Better fix for LowLevel CDC demo issue where sending data before the line encoding is set will cause a failure of the host to open the port. Added fix to the DualCDC and USBtoSerial LowLevel demos.

Fix issue with CDC device demos causing broken communications when the device tries to send data before the host has set the line encoding.

Renamed ATTR_NOINLINE to ATTR_NO_INLINE to fit with the rest of the library function attribute names.

Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.

Make both LowLevel and ClassDriver AudioOutput demos always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS compile time option from the demo). This allows for positive feedback to the user of audio activity regardless of output mode.

Removed interrupt disable/enable from the Device mode control request processing routines, as they can cause problems with user code and can cause infinite spinlocks under some circumstances.

Added new LUFA logo from EDIGMA.COM.

Fixed the ClassDriver GenericHID demo so that it echoes back reports as indicated in the demo overview.

Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).

Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).

Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).