Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task.

Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device.

Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*.

Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required.

Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required.

Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file.

Add the GCC -fno-split-wide-types compile time option to some of the larger user projects to reduce the compiled application size.

Switch the HTTP Webserver project to use the safer strlcpy() instead of strncpy() to save on manual null-termination.

Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.

Add new "checksource" target to the library makefiles, for automated source file existance checking.

Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.

Add new MediaController project, a simple Media Playback control manipulator (Play/Pause/Next Track/Volume/etc.).

Correct errors in the DHCP Server application in the Webserver project, that was causing random server restarts and/or incorrectly allocated IP addresses.

Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.

Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.

Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.

Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.

Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.

Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.

Add const to all project descriptor definitions for safety.

Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).

Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.

Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.

Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).

The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio.

Add GCC_FORCE_POINTER_ACCESS() macro use to the RingBuffer library header, to attempt to force GCC into producing more efficient code for manipulating the buffers.

Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.

Add DEVICE_STATE_AS_GPIOR=0 compile time option to the library projects, to reduce compiled binary size.

Changed the XPLAINBridge software UART to use the regular CTC mode instead of the alternative CTC mode via the Input Capture register, to reduce user confusion.

Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.

Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).

Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct.

Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).

Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.

Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.

Add descriptor class, subclass and protocol constants to the class drivers, modify all demos to use them where possible.

Move out private/internal host class driver constants to the common class driver headers, so that they can be used in the Low Level host mode demos.

Ensure all demos, projects and bootloaders use the class driver constants where possible to minimise code repetition.

All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included.

All LowLevel demos changed to use the constants and types defined in the USB class drivers.

Fix Webserver project code not compiling due to the changes to the USB mode selection constant names.

Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.

Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.

Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.

Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.

Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.