Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.

Fix incorrect HWB button mask in the STK526 Buttons driver.

Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.

Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).

Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.

Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.

Change project makefiles so that the current target settings and not just the board selection is printed during the build process.

Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.

Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.

Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.

Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.

Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.

Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.

State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.

Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.

Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.

Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.

Completed host CDC class driver enumeration code.

Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.

Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.

Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.

Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.

Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.

Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.

Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.

Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.

Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.

Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.

Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.

Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.

Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.

Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.

Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).

Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).

Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.