Add missing project files for the new HIDReportViewer project to upgrade its status to a finished (working) project.

Move the HIDReportViewer project into the normal Projects/ folder and out of the Incomplete/ projects folder.

Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.

Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates.

Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates.

Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed.

Fix broken LowLevel audio demo descriptors.

Minor documentation fixes.

Added missing Audio class control request definitions.

Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.

Fix incorrect project name in the Projects/ folder makefile.

Update MediaController project to remove the Record usage (not often needed) and explicitly declare each usage for maximum clarity.

Add new MediaController project, a simple Media Playback control manipulator (Play/Pause/Next Track/Volume/etc.).

Correct errors in the DHCP Server application in the Webserver project, that was causing random server restarts and/or incorrectly allocated IP addresses.

Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.

Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.

Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.

Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.

Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.

Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.

Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.

Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.

Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point instead of starting point, to give maximum reliability (thanks to Anton).

Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.

More UC3B architecture porting.

Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).

Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.

Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.

Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.

Add const to all project descriptor definitions for safety.

Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank  size under avrdude (thanks to Steffan Woltjer).

Oops - fix up some calls to the old function names, include Serial Peripheral driver in the RNDISEthernetHost project.

Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.

Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.

Altered the serial byte receive function to make it non-blocking.

Oops - forgot to add in LOGICAL MINIMUM and LOGICAL MAXIMUM report items into the standard library Joystick HID report descriptor macro. Add in support for joystick resolution reporting via PHYSICAL_MINIMUM and PHYSICAL_MAXIMUM items.