Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

Turn OFF double banking in the Webserver demo - leaving it on seems to destroy the system throughput.

Add FatFS library to the Webserver project, extend the HTTP server so that it now serves files from the Dataflash. Add Mass Storage device mode class driver so that files can be loaded to the board Dataflash when inserted into a PC.

Make the StandaloneProgrammer project seamlessly read out drive contents from either an attached FAT formatted drive when in host mode, or the onboard FAT formatted dataflash when in device mode.

The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.

The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).

The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.

The USB_MODE_HOST token is now defined even when host mode is not available.

Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.

Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.

Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.

Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.

Changed Dataflash_Init() to no longer call SPI_Init() automatically.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.

State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.

Added parameter directions to function parameter documentation.

Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).

Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.

Changed to new device mode Class Driver function name prefixes to make way for similar host mode Class drivers.

Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.

Redocumented all device demos, now that they have changed over to the new USB class drivers.

Added C linkage to class drivers for C++ support.

Added prefixes to most of the class driver constants to prevent name clashes.

Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.

Removed scheduler and memory allocation libraries.

Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).

Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.

Change USBtoSerial Tx to polling-driven rather than interrupt driven, to ensure more time for the Rx interrupt to be serviced.

Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).

Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.

Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.

Removed all user pipe/endpoint interrupt APIs, added internal library support for interrupt driven control endpoints when in device mode by defining INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.

Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman).

Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues.

USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode rather than having the library pass only partially read header data to the application.

The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.

The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.

Removed specialized Endpoint_ClearControl* and Pipe_ClearControl* macros in favour of the standard Endpoint_Clear* and Pipe_Clear* macros (Atmel have confirmed no effect from setting FIFOCON on control endpoints).

Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander).

Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev).

Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).

Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.

Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.

Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).

Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.

Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.

Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.

Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to outdated avr-libc versions.

All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected.

Seperated out OTG, Device and Host mode demos into seperate folders for clarity. Adjusted makefiles so that the path to the LUFA library can be set in one place.

Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson).