- Jul 28, 2009
-
-
Dean Camera authored
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits. Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
-
Dean Camera authored
Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
-
Dean Camera authored
Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.
-
- Jul 27, 2009
-
-
Dean Camera authored
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
-
Dean Camera authored
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
-
Dean Camera authored
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
-
Dean Camera authored
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
-
- Jul 26, 2009
-
-
Dean Camera authored
Completed host CDC class driver enumeration code.
-
Dean Camera authored
-
- Jul 24, 2009
-
-
Dean Camera authored
-
Dean Camera authored
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
-
- Jul 23, 2009
-
-
Dean Camera authored
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
-
Dean Camera authored
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed. Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board. Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
-
- Jul 21, 2009
-
-
Dean Camera authored
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
-
Dean Camera authored
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers. Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality. Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead. Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
-
Dean Camera authored
-
Dean Camera authored
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
-
Dean Camera authored
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
-
- Jul 20, 2009
-
-
Dean Camera authored
-
Dean Camera authored
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories. Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
-
Dean Camera authored
-
Dean Camera authored
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews). Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
-
- Jul 19, 2009
-
-
Dean Camera authored
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
-
Dean Camera authored
Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure. Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.
-
Dean Camera authored
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
-
- Jul 16, 2009
-
-
Dean Camera authored
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
-
Dean Camera authored
-
Dean Camera authored
-
Dean Camera authored
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility). Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
-
- Jul 15, 2009
-
-
Dean Camera authored
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces. Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman). Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
-
- Jul 14, 2009
-
-
Dean Camera authored
-
Dean Camera authored
-
- Jul 13, 2009
-
-
Dean Camera authored
-
Dean Camera authored
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
-
Dean Camera authored
Documented FAST_STREAM_TRANSFERS compile time option. Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
-
Dean Camera authored
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state. Added verbose documentation for each of the USB Host state machine states.
-
Dean Camera authored
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
-
- Jul 11, 2009
-
-
Dean Camera authored
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder. Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
-
- Jun 29, 2009
-
-
Dean Camera authored
Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards. Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index. Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
-
- Jun 28, 2009
-
-
Dean Camera authored
Added parameter directions to function parameter documentation. Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
-