Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).

Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.

Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.

Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.

Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.

Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.

Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.

Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.

Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.

Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).

Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.

Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.

Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.

Add missing const qualifiers to the demos.

Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.

Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.

Add glitch protection to the software UART in the XPLAINBridge project code, so that very short glitches on the RX line don't cause a frame reception to occur.

Major changes to the XPLAINBridge software UART code for performance and reliability. New code reduces the number of missed characters and misread characters.

Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.

Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.

Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and XPLAINBridge project loops and into the AVRISP management function.

Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.

Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor.

Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.

Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.

Switch software UART over to timer 1 and remove timer prescaling to try to prevent integer rounding errors and thus minimize the possible error of the UART code.

Rename software USART driver globals to make the code more in line with the rest of the XPLAINBridge project.

Make software USART used in the XPLAINBridge project directly check and store into the ring buffers, rather than polling from the main program loop to avoid added latency.

Create a new LightweightRingBuffer.h header file for the XPLAIN project to abstract out the new ring buffer without a performance penalty.

The RingBuff library code has been replaced in the XPLAINBridge project with an ultra lightweight buffer to help  improve the reliability of the bridge.

The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver.

Fix Benito makefile which was accidentally changed during testing.

Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run.

Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.

Added WIN_LIBUSB_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows builds of avrdude at the expense of AVRStudio compatibility.

Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.

Changed XPLAINBridge project to be both a USB to USART bridge and a PDI programmer, based on the state of a mode select pin.

Removed John Steggall's software UART code from the XPLAIN Bridge project due to reliability issues.

Enable pullup on the PD5 pin of the AVR in the XPLAINBridge project - this is connected to the XMEGA's /RESET line, need to enable pullup to prevent spurrious resets.

Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.

Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.