Added missing Audio class control request definitions.

Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.

Fix incorrect project name in the Projects/ folder makefile.

Update MediaController project to remove the Record usage (not often needed) and explicitly declare each usage for maximum clarity.

Add new MediaController project, a simple Media Playback control manipulator (Play/Pause/Next Track/Volume/etc.).

Correct errors in the DHCP Server application in the Webserver project, that was causing random server restarts and/or incorrectly allocated IP addresses.

Add RNDIS Device support to the Webserver project, so that the files stored on the device can be viewed from a web-browser while the board is plugged into a host machine.

Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.

Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.

Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.

Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.

Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.

Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.

Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.

Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.

Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point instead of starting point, to give maximum reliability (thanks to Anton).

Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called.

More UC3B architecture porting.

Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).

Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.

Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.

Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.

Add const to all project descriptor definitions for safety.

Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank  size under avrdude (thanks to Steffan Woltjer).

Oops - fix up some calls to the old function names, include Serial Peripheral driver in the RNDISEthernetHost project.

Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.

Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.

Altered the serial byte receive function to make it non-blocking.

Oops - forgot to add in LOGICAL MINIMUM and LOGICAL MAXIMUM report items into the standard library Joystick HID report descriptor macro. Add in support for joystick resolution reporting via PHYSICAL_MINIMUM and PHYSICAL_MAXIMUM items.

Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.

Fix reversed byte ordering of multi-byte HID data.

Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.

Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.

Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.

Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 for other uses in the future.

Abuse the the C preprocessor so that the HID macros can automatically encode data into the array from the HID macros automagically, by specifying the bit-width of the data, and the data itself as a single integer value of that width.

New HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors.

Changed over all project and demo HID report descriptors to use the new HID report item macros.

Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/.

Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.

Spell check source code files.

Oops - The DS1307 contains an unused "DayOfWeek" register that must be accounted for in the new unified DS1307 Time/Day read and write routines.

Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition.