Commit b5a0cee4 authored by Jake Read's avatar Jake Read

update with n17

parent c5be1d0f
......@@ -34,6 +34,31 @@ Make sure to change 'type' to .step, and check the 'save to my computer' box. No
**Alternately,** you can save the changes to a new file and import that model into another Fusion 360 Assembly.
## Gantry for NEMA17 Motor, 0.25" ALU
![RCTN23-0375HDPE](images/RCTN23-hdpe-img.jpg)
-42.3 mm - ( 6.5 * 2 ) * 1 mm
https://www.vxb.com/20-625ZZ-5x16x5-Metal-5mm-Bore-Miniature-p/kit250.htm
Flat Heads
- 20mm for reach-thru on motor runner
- ? there are more ?
- holes in plate
- wj plate
- wire organizer test, plate feet
- 3dpnext
- wj
- do we have belts, do we have pulleys, order bearings, last mcmaster, admirals, etc, close it out and next up we do software problems
### Notes from the First Build
Increased preload from 0.2 to 0.4mm
A few fitting things ... motor mounts get lots more clearance
Increased sizes for heat-set inserts to make overflow smaller.
## Gantry for NEMA23 Motor, 0.375" HDPE
![RCTN23-0375HDPE](images/RCTN23-hdpe-img.jpg)
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
This diff is collapsed.
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
w_rail,mm,65 mm,width of the rail - from 60 by 10mm increment
l_gantry,mm,100 mm + 8.15 mm,length of the travelling gantry - from 100 by 10mm increment
l_travel,mm,785 mm,total length of travel
t_sheet_MAIN,mm,4 / 16 * 1",thickness of *most* of the gantry material
t_sheet_SECOND,mm,1 / 4 * 1",thickness of the webs
t_three,mm,0.1 mm,
t_four,mm,0.1 mm,
od_bearings,mm,16 mm,
id_bearings,mm,5 mm,
t_bearings,mm,5 mm,
p_belt,mm,2 mm,
w_belt,mm,9 mm,
t_belt,mm,1.4 mm,
t_meshedBelts,mm,2.5 mm,
d_rail,mm,1",
nt_pinion,,20,
d99,mm,20 mm,
d_beam,mm,od_bearings + t_sheet_MAIN + 2 mm + 5 mm,min. is 2*t_bearings+3*shim+6mm+clearance
d124,mm,t_sheet_MAIN * 1.5,
d129,mm,3 mm,
hw_m6_drill,mm,5 mm,5mm for zund bit
r_cutoutTool,mm,4.1 mm / 2,
preload_flex_length,mm,12 mm,
preload_flex_thickness,mm,1.25 mm,
hw_m3_thru,mm,3.25 mm,
hw_m3_head,mm,5.5 mm,
hw_m3_washer,mm,7 mm,
hw_m3_thread,mm,2.5 mm,
tab_breather,mm,0.2 mm,tab clearance
d213,mm,tab_breather,
hw_m5_thread,mm,4.2 mm,
hw_m5_head,mm,8.5 mm,
hw_m5_washer,mm,10 mm,
hw_m5_thru,mm,5.25 mm,
hw_m6_thru,mm,6.5 mm,
hw_m6_head,mm,10 mm,
hw_m6_washer,mm,12 mm,
d682,mm,1 mm,
preload_displacement,mm,0.25 mm,
dist_gap,mm,5 mm,
d732,mm,0.5 mm,
d893,mm,2.25 mm,
d939,mm,hw_m3_head + 2 mm,
d940,mm,d939 / 2 + 2 mm,
l_beltblock,mm,12.5 mm,
tab_breather_hdpe,mm,tab_breather / 2,
total_length,mm,l_gantry + l_travel + 2 * l_beltblock,
hw_plstf6_thread,mm,2.94 mm,
hw_plstf6_thru,mm,4 mm,
hw_plstf6_head,mm,6.86 mm,
hw_plstf6_washer,mm,7.92 mm,
t_beltroller_wall,mm,1.7 mm,
hw_m3_flathead,mm,6 mm,
num_tabs,,5,number of tabs in web
d1317,mm,1 mm,
hw_m4insert_d,mm,5.8 mm,
hw_m4insert_l,mm,4.8 mm,
hw_m4_tappedwj,mm,3.3 mm,
hw_m4_thru,mm,4.25 mm,
hw_m4_head,mm,7 mm,
hw_m4_headheight,mm,4 mm,
preload_bearings,mm,0.2 mm,
dpblock_aboveboard,mm,5.5 mm,
dpblock_belowdecks,mm,4.5 mm,
hw_m3insert_d,mm,5.2 mm,
hw_m3insert_l,mm,3.8 mm,
d1510,deg,5 deg,
nh_rail_wide,,round(w_rail / 20 mm),
nh_rail_long,,round(l_rail / 20 mm),
l_rail,mm,l_travel + l_gantry + 2 * l_beltblock,
d670,mm,w_rail,
d671,mm,l_travel + l_gantry + 2 * l_beltblock,
d672,mm,l_gantry,
d673,mm,od_bearings,
d674,mm,l_beltblock,
d675,mm,od_bearings,
d677,mm,t_bearings,
d678,mm,od_bearings,
d679,mm,t_sheet_SECOND,
d680,mm,8 mm,
d765,mm,t_sheet_MAIN,
d766,mm,d682,
d1315,mm,4 mm,
d1316,mm,0.5 mm,
d1320,mm,4 mm,
d1321,mm,4 mm + 0.5 mm + 0.5 mm,
d1330,mm,d1317,
d1331,mm,1 mm,
d1332,mm,hw_m3_flathead + 1 mm,
d1333,mm,7 mm,
d1334,mm,d1332 / 2,
d1381,mm,hw_m4_tappedwj,
d1386,mm,hw_m3insert_d,
d1387,mm,( 0.15 * 6 ) * 1 mm,
d1400,mm,hw_m3_thru,
d1401,mm,10 mm,
d1404,mm,hw_m4_thru,
d1426,mm,preload_bearings / 2,
d1438,mm,1.7 mm * 1.5 / 3,
d1607,mm,d1438,
d685,mm,-t_sheet_MAIN,
d686,deg,0.0 deg,
d687,mm,dist_gap,
d688,mm,t_sheet_MAIN,
d689,deg,0.0 deg,
d1322,mm,0.00 mm,
d1323,mm,-t_bearings,
d1324,deg,0.0 deg,
d1325,mm,od_bearings,
d1354,mm,hw_m4insert_d,
d1355,mm,0.5 mm,
d1356,mm,6 mm,
d1357,mm,0.5 mm,
d1362,mm,1 mm,
d1366,mm,15 mm,
d1428,mm,preload_bearings,
d1327,mm,0.00 mm,
d1328,mm,-t_bearings,
d1329,deg,0.0 deg,
d1335,mm,0.00 mm,
d1336,mm,dpblock_aboveboard,
d1337,deg,0.0 deg,
d1338,mm,0.00 mm,
d1339,mm,-t_sheet_MAIN,
d1340,deg,0.0 deg,
d1341,mm,0.00 mm,
d1342,mm,-dpblock_belowdecks,
d1343,deg,0.0 deg,
d1344,mm,0.00 mm,
d1345,mm,-23.5 mm,
d1346,deg,0.0 deg,
d1347,mm,0.00 mm,
d1348,deg,0.0 deg,
d1349,mm,-0.5 mm,
d1350,mm,-0.5 mm,
d1351,mm,-0.15 mm,
d1358,mm,0.00 mm,
d1359,deg,0.0 deg,
d1360,mm,0.00 mm,
d1361,deg,0.0 deg,
d1363,mm,0.00 mm,
d1364,mm,1 mm,
d1365,deg,0.0 deg,
d1367,mm,1.15 mm,
d1394,mm,hw_m4_thru,
d1491,mm,6 mm,
d1368,mm,29.00 mm,
d1369,deg,0.0 deg,
d1388,mm,0.00 mm,
d1389,deg,0.0 deg,
d1390,mm,0.00 mm,
d1391,deg,0.0 deg,
d1392,mm,-2 mm,
d1393,deg,0.0 deg,
d1396,mm,0.00 mm,
d1397,deg,0.0 deg,
d1398,mm,0.00 mm,
d1399,deg,0.0 deg,
d1402,mm,0.00 mm,
d1403,deg,0.0 deg,
d1406,mm,7.50 mm,
d1407,mm,0.00 mm,
d1408,deg,0.0 deg,
d1409,mm,1 mm,
d1410,mm,2 mm,
d1412,mm,1 mm,
d1413,mm,0.5 mm,
d1414,mm,2 mm,
d1415,mm,3.5 mm,
d1421,mm,1 mm,
d1422,mm,2.5 mm,
d1424,mm,3 mm,
d1425,mm,0.5 mm,
d1431,mm,7 mm,
d1432,mm,1.20 mm,
d1433,mm,1 mm,
d1434,mm,2.774 mm,
d1435,mm,2.769 mm,
d1442,mm,0.00 mm,
d1443,mm,0.00 mm,
d1444,deg,0.0 deg,
d1447,mm,0.60 mm,
d1450,mm,2.1 mm,
d1451,mm,2 mm,
d1459,mm,42.3 mm,
d1460,mm,48 mm,
d1461,mm,t_bearings,
d1462,mm,od_bearings,
d1463,mm,t_meshedBelts,
d1464,mm,0.5 mm,
d1465,mm,6.5 mm,
d1466,mm,19 mm,
d1467,mm,0.5 mm,
d1468,mm,1 mm,
d1469,mm,4 mm,
d1470,mm,4.5 mm,
d1471,mm,2.5 mm,
d1472,mm,0.15 mm,
d1473,mm,0.1 mm,
d1474,mm,d1475,
d1475,mm,hw_m3_flathead + 1 mm,
d1476,mm,1 mm,
d1478,mm,dpblock_aboveboard,
d1481,mm,dpblock_belowdecks,
d1483,mm,3 mm,
d1484,mm,5 mm,
d1496,mm,0.15 mm,
d1497,mm,d1496,
d1457,mm,11 mm,
d1455,mm,-11 mm,
d1456,deg,0.0 deg,
d1488,mm,1.5 mm,
d1489,mm,1 mm,
d1490,mm,1 mm,
d1492,mm,1 mm,
d1493,mm,0.5 mm,
d1494,mm,-42.3 mm - ( 6.5 * 2 ) * 1 mm,
d1495,deg,0.0 deg,
d1498,mm,0.00 mm,
d1499,deg,0.0 deg,
d1500,mm,31 mm,
d1503,mm,od_bearings,
d1504,mm,hw_m4insert_d,
d1506,mm,t_meshedBelts,
d1507,mm,( 2 * nt_pinion / PI ) * 1 mm,
d1508,mm,d1507 / 2 + t_belt,
d1509,mm,d1508,
d1515,mm,hw_m3_thru,
d1516,mm,( 3.2 / 2 ) * 1 mm,
d1517,mm,hw_m3_washer / 2,
d1518,deg,5 deg,
d1520,deg,d1518,
d1521,mm,hw_m3_washer,
d1522,deg,d1518,
d1523,mm,42.3 mm,
d1524,mm,( 22.25 / 2 ) * 1 mm,
d1525,deg,d1518,
d1530,mm,1.5 mm,
d1531,mm,t_belt + 1.5 mm,
d1532,deg,10 deg,
d1533,mm,9.1 mm,
d1534,mm,hw_m3insert_d,
d1535,mm,hw_m3_flathead,
d1536,mm,hw_m3_thru,
d1537,mm,5 mm,
d1538,mm,8 mm,
d1539,mm,d1540,
d1540,mm,3.25 mm,
d1541,mm,0.75 mm,
d1542,deg,90 deg,
d1549,mm,d1540,
d1526,mm,0.00 mm,
d1527,deg,0.0 deg,
d1528,mm,0.00 mm,
d1529,deg,0.0 deg,
d1551,deg,0.0 deg,
d1576,mm,0.5 mm,
d1552,mm,0.00 mm,
d1553,deg,0.0 deg,
d1554,mm,0.00 mm,
d1555,deg,0.0 deg,
d1557,mm,hw_m3_thru,
d1558,mm,hw_m4insert_d,
d1559,mm,( ( hw_m3_flathead + 1 mm ) / 2 mm ) * 1 mm,
d1560,mm,d1559,
d1561,mm,d1559,
d1562,mm,d1560,
d1563,mm,d1560 * 2 + 10 mm,
d1564,mm,d1559 * 2,
d1565,mm,d1563,
d1566,mm,0.00 mm,
d1567,deg,0.0 deg,
d1568,mm,0.00 mm,
d1569,deg,0.0 deg,
d1570,mm,0.00 mm,
d1571,deg,0.0 deg,
d1572,mm,0.00 mm,
d1573,deg,0.0 deg,
d1574,mm,1.5 mm,
d1577,mm,1.5 mm,
d1578,mm,hw_m3insert_d,
d1579,mm,hw_m3_thru,
d1580,mm,0.00 mm,
d1581,deg,0.0 deg,
d1582,mm,-hw_m3insert_l,
d1583,deg,0.0 deg,
d1584,mm,1 mm,
d1585,mm,3.5 mm,
d1586,mm,0.5 mm,
d1587,mm,0.00 mm,
d1588,deg,0.0 deg,
d1589,mm,3 mm,
d1593,mm,5 mm,
d1595,deg,0.0 deg,
d1596,mm,-11.00 mm,
d1597,mm,6 mm,
d1598,mm,5 mm,
d1599,mm,4 mm,
d1600,mm,2 mm,
d1601,mm,2.1 mm,
d1602,mm,1.9 mm,
d1603,mm,0.5 mm,
d1604,mm,t_bearings * 2,
d1605,deg,0.0 deg,
d1608,mm,0.00 mm,
d1609,mm,t_sheet_MAIN,
d1610,deg,0.0 deg,
d1613,mm,12.5 mm,
d1614,mm,5 mm,
d1615,mm,3.7 mm,
d1622,mm,hw_m4_head,
d1616,mm,-t_sheet_MAIN,
d1617,deg,0.0 deg,
d1618,,nh_rail_long,
d1619,,3,
d1620,mm,20 mm,
d1621,mm,20 mm,
d1626,mm,hw_m3_thread,
d1627,mm,8.5 mm,
d1628,mm,4.5 mm,
d1629,mm,d1627,
d1630,mm,8.5 mm,
d1631,mm,4.5 mm,
d1632,mm,d1630,
d1633,mm,-t_sheet_MAIN,
d1634,deg,0.0 deg,
d1635,mm,hw_m4_tappedwj,
d1636,mm,5 mm,
d1638,mm,5 mm,
d1639,mm,-t_sheet_MAIN,
d1640,deg,0.0 deg,
d1641,,7,
d1642,,10,
d1643,mm,10 mm,
d1644,mm,10.00 mm,
d1645,mm,0.00 mm,
d1646,deg,0.0 deg,
d1647,mm,2 mm,
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment