Commit 51ff13cc authored by Sam Calisch's avatar Sam Calisch

update for bc832

parent b428139f
Pipeline #607 passed with stage
in 0 seconds
......@@ -120,8 +120,13 @@ void loop() {}
</code>
</pre>
<p>This test was run on a board built around the Fanstel BC832 module. The module retails for $7, but other modules are available for $5 from Fanstel.</p>
<p>This test was run on a board built around the Fanstel BC832 module. The module retails for $7, but other modules are available for $5 from Fanstel. This board has a place for an external 32.768 kHz oscillator, but this isn't necessary and rings at the same speed without it populated. <a href='bc832-nrf-ftdi-traces.png'>BC832 Board Traces</a> <a href='bc832-nrf-ftdi-interior.png'>BC832 Board Interior</a></p>
<img src='bc832-nrf-ftdi-layout.png' width=30%>
<img src='board.jpg' width=47%>
<p>As seen in the datasheet excerpt below, the NRF52 has faster times for switching between TX and RX as compared to many other transceiver chips.</p>
<figure>
<img src='radio-modes.png' width=80%>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment