Prorgammers image

README.md

@@ -48,7 +48,7 @@ If all goes well, your board will now be detected as a serial port and you can s
 
 To upload a sketch, simply use the `upload` command or the arrow icon. Make sure the bootloader size is not set to `NO_BOOTLOADER`, otherwise the bootloader won't be used.
 
-<img src=img/upload.png width=50%><img src=img/upload_alt.png width=50%>
+<img src=img/upload.png width=50%>
 
 ### 1.3 Upload with programmer (optional)
 
@@ -71,6 +71,6 @@ To enable this behavior, simply select `NO_BOOTLOADER` in bootloader size:
 
 ### 2.1 Upload
 
-To upload without a bootloader, connect a programmer and either pick `Upload` or `Upload Using Programmer`:
+To upload without a bootloader, connect a programmer and either pick `Upload` or the arrow button. `Upload Using Programmer` has the same effect.
 
-<img src=img/upload.png width=50%><img src=img/upload_programmer.png width=50%><br>
+<img src=img/upload.png width=50%>