Commit 187ccb2e authored by Dean Camera's avatar Dean Camera
Browse files

Fix typos and outdated information.

parent 154f934b
......@@ -47,24 +47,23 @@
*
* \section Sec_Description Project Description:
*
* Dual LUN Mass Storage demonstration application. This gives a simple
* reference application for implementing a multiple LUN USB Mass Storage
* device using the basic USB UFI drivers in all modern OSes (i.e. no
* special drivers required).
* Mass Storage device demonstration application. This gives a simple
* reference application for implementing a USB Mass Storage device using
* the basic USB UFI drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function as an
* external mass storage device with two LUNs (separate disks) which may
* be formatted and used in the same manner as commercial USB Mass Storage
* devices.
* external mass storage device which may be formatted and used in the same
* manner as commercial USB Mass Storage devices.
*
* You will need to format the mass storage drives upon first run of this
* You will need to format the mass storage drive upon first run of this
* demonstration - as the device acts only as a data block transport between
* the host and the storage media, it does not matter what file system is used,
* as the data interpretation is performed by the host and not the USB device.
*
* This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
* value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
* 255), with each LUN being allocated an equal portion of the available
* This demo is not restricted to only a single LUN (logical disk); by changing
* the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
* (from 1 to 255), with each LUN being allocated an equal portion of the available
* Dataflash memory.
*
* The USB control endpoint is managed entirely by the library using endpoint
......
......@@ -47,24 +47,23 @@
*
* \section Sec_Description Project Description:
*
* Dual LUN Mass Storage demonstration application. This gives a simple
* reference application for implementing a multiple LUN USB Mass Storage
* device using the basic USB UFI drivers in all modern OSes (i.e. no
* special drivers required).
* Mass Storage device demonstration application. This gives a simple
* reference application for implementing a USB Mass Storage device using
* the basic USB UFI drivers in all modern OSes (i.e. no special drivers
* required).
*
* On start-up the system will automatically enumerate and function as an
* external mass storage device with two LUNs (separate disks) which may
* be formatted and used in the same manner as commercial USB Mass Storage
* devices.
* external mass storage device which may be formatted and used in the same
* manner as commercial USB Mass Storage devices.
*
* You will need to format the mass storage drives upon first run of this
* You will need to format the mass storage drive upon first run of this
* demonstration - as the device acts only as a data block transport between
* the host and the storage media, it does not matter what file system is used,
* as the data interpretation is performed by the host and not the USB device.
*
* This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
* value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
* 255), with each LUN being allocated an equal portion of the available
* This demo is not restricted to only a single LUN (logical disk); by changing
* the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
* (from 1 to 255), with each LUN being allocated an equal portion of the available
* Dataflash memory.
*
* The USB control endpoint is managed entirely by the library using endpoint
......
......@@ -234,7 +234,7 @@
/* Includes: */
#if (BOARD == BOARD_NONE)
#error The Board Buttons driver cannot be used if the makefile BOARD option is not set.
#error The Board Dataflash driver cannot be used if the makefile BOARD option is not set.
#elif (BOARD == BOARD_USBKEY)
#include "USBKEY/Dataflash.h"
#elif (BOARD == BOARD_STK525)
......
......@@ -122,7 +122,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
char LineBuffer[100];
uint16_t BytesWritten;
BytesWritten = sprintf(LineBuffer, "%02d/%02d/20%04d, %02d:%02d:%02d, %d Degrees\r\n",
BytesWritten = sprintf(LineBuffer, "%02d/%02d/20%02d, %02d:%02d:%02d, %d Degrees\r\n",
Day, Month, Year, Hour, Minute, Second, Temperature_GetTemperature());
f_write(&TempLogFile, LineBuffer, BytesWritten, &BytesWritten);
......
......@@ -133,7 +133,6 @@ include $(LUFA_PATH)/LUFA/makefile
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Descriptors.c \
Descriptors.c \
Lib/DataflashManager.c \
Lib/SCSI.c \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment