Fix typos and outdated information.

Demos/Device/ClassDriver/MassStorage/MassStorage.txt

@@ -47,24 +47,23 @@
  *
  *  \section Sec_Description Project Description:
  *
- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
  *
  *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
  *
- *  You will need to format the mass storage drives upon first run of this
+ *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint

Demos/Device/LowLevel/MassStorage/MassStorage.txt

@@ -47,24 +47,23 @@
  *
  *  \section Sec_Description Project Description:
  *
- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).
  *
  *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
  *
- *  You will need to format the mass storage drives upon first run of this
+ *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint

LUFA/Drivers/Board/Dataflash.h

@@ -234,7 +234,7 @@
 
 		/* Includes: */
 			#if (BOARD == BOARD_NONE)
-				#error The Board Buttons driver cannot be used if the makefile BOARD option is not set.
+				#error The Board Dataflash driver cannot be used if the makefile BOARD option is not set.
 			#elif (BOARD == BOARD_USBKEY)
 				#include "USBKEY/Dataflash.h"
 			#elif (BOARD == BOARD_STK525)

Projects/TempDataLogger/TempDataLogger.c

@@ -122,7 +122,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 		char     LineBuffer[100];
 		uint16_t BytesWritten;
 
-		BytesWritten = sprintf(LineBuffer, "%02d/%02d/20%04d, %02d:%02d:%02d, %d Degrees\r\n",
+		BytesWritten = sprintf(LineBuffer, "%02d/%02d/20%02d, %02d:%02d:%02d, %d Degrees\r\n",
 							   Day, Month, Year, Hour, Minute, Second, Temperature_GetTemperature());
 
 		f_write(&TempLogFile, LineBuffer, BytesWritten, &BytesWritten);

Projects/TempDataLogger/makefile

@@ -133,7 +133,6 @@ include $(LUFA_PATH)/LUFA/makefile
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
-	  Descriptors.c                                               \
 	  Descriptors.c                                               \
 	  Lib/DataflashManager.c                                      \
 	  Lib/SCSI.c                                                  \