Add EEPROM programming target to the AVRDUDE build system module. Correct...

Add EEPROM programming target to the AVRDUDE build system module. Correct message output test for the BUILD build system module. Clean up DOXYGEN build system module logic.

LUFA/Build/lufa.avrdude.in

@@ -7,7 +7,7 @@
 #
 
 LUFA_BUILD_MODULES        += AVRDUDE
-LUFA_BUILD_TARGETS        += program
+LUFA_BUILD_TARGETS        += program program_ee
 LUFA_BUILD_MANDATORY_VARS += MCU TARGET
 LUFA_BUILD_OPTIONAL_VARS  += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS
 
@@ -20,7 +20,10 @@ LUFA_BUILD_OPTIONAL_VARS  += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS
 # -----------------------------------------------------------------------------
 # TARGETS:
 #
-#    program                   - Program target with application using avr-dude
+#    program                   - Program target FLASH with application using
+#                                avrdude
+#    program_ee                - Program target EEPROM with application data
+#                                using avrdude
 #
 # MANDATORY PARAMETERS:
 #
@@ -42,11 +45,18 @@ TARGET             ?= $(error Makefile TARGET value not set.)
 # Default values of optionally user-supplied variables
 AVRDUDE_PROGRAMMER ?= jtagicemkii
 AVRDUDE_PORT       ?= usb
-AVRDUDE_FLAGS      ?= -U flash:w:$(TARGET).hex
+AVRDUDE_FLAGS      ?= 
 
 # Output Messages
 MSG_AVRDUDE_CMD     = ' [AVRDUDE] :'
 
+AVRDUDE_FLASH_FLAGS = -U flash:w:$< $(AVRDUDE_FLAGS)
+AVRDUDE_EEP_FLAGS   = -U eeprom:w:$< $(AVRDUDE_FLAGS)
+
 program: $(TARGET).hex
-	@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" with settings \"$(AVRDUDE_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
-	avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) $(AVRDUDE_FLAGS)
+	@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
+	avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) $(AVRDUDE_FLASH_FLAGS)
+
+program_ee: $(TARGET).eep
+	@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
+	avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) $(AVRDUDE_EEP_FLAGS)

LUFA/Build/lufa.build.in

@@ -161,15 +161,15 @@ hex: $(TARGET).hex $(TARGET).eep
 lss: $(TARGET).lss
 
 %.o: %.c
-	@echo $(MSG_COMPILE_CMD) Compiling C file \"$^\"
+	@echo $(MSG_COMPILE_CMD) Compiling C file \"$<\"
 	$(CROSS)gcc -c $(CC_FLAGS) $(C_FLAGS) -O$(OPTIMIZATION) -std=$(C_STANDARD) $< -o $@
 
 %.o: %.cpp
-	@echo $(MSG_COMPILE_CMD) Compiling C++ file \"$^\"
+	@echo $(MSG_COMPILE_CMD) Compiling C++ file \"$<\"
 	$(CROSS)gcc -c $(CC_FLAGS) $(CPP_FLAGS) -O$(OPTIMIZATION) -std=$(CPP_STANDARD) -x c++ $< -o $@
 	
 %.o: %.S
-	@echo $(MSG_COMPILE_CMD) Assembling \"$^\"
+	@echo $(MSG_COMPILE_CMD) Assembling \"$<\"
 	$(CROSS)gcc -c $(CC_FLAGS) $(ASM_FLAGS) -x assembler-with-cpp $< -o $@
 
 .PRECIOUS : $(OBJECT_FILES)
@@ -178,15 +178,15 @@ lss: $(TARGET).lss
 	$(CROSS)gcc $^ $(CC_FLAGS) $(LD_FLAGS) -o $@
 
 %.hex: %.elf
-	@echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$@\"
+	@echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
 	$(CROSS)objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
 
 %.eep: %.elf
-	@echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$@\"
+	@echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
 	$(CROSS)objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
 
 %.lss: %.elf
-	@echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$@\"
+	@echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
 	$(CROSS)objdump -h -S -z $< > $@
 
 clean:

LUFA/Build/lufa.doxygen.in

@@ -44,9 +44,11 @@ DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES
 MSG_DOXYGEN_CMD          = ' [DOXYGEN] :'
 
 # Determine Doxygen invocation command
-DOXYGEN_CMD = ( cat Doxygen.conf ; $(DOXYGEN_OVERRIDE_PARAMS:%=echo "%";)) | doxygen -
+BASE_DOXYGEN_CMD = ( cat Doxygen.conf ; $(DOXYGEN_OVERRIDE_PARAMS:%=echo "%") ) | doxygen -
 ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y)
-    DOXYGEN_CMD = if ( ( cat Doxygen.conf $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi;
+    DOXYGEN_CMD = if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi;
+else
+    DOXYGEN_CMD = $(BASE_DOXYGEN_CMD)
 endif
 
 doxygen: