Commit d297ea12 authored by Dean Camera's avatar Dean Camera
Browse files

Added new "Common" section to the class drivers, to hold all mode-independant...

Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity.

Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code.
parent f7cde02b
This diff is collapsed.
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassAudio
* @defgroup Group_USBClassAudioCommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* Audio Class.
*
* @{
*/
......
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassCDC
* @defgroup Group_USBClassCDCCommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* CDC Class.
*
* @{
*/
......
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassHID
* @defgroup Group_USBClassHIDCommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* HID Class.
*
* @{
*/
......
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassMIDI
* @defgroup Group_USBClassMIDICommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* MIDI Class.
*
* @{
*/
......
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassMS
* @defgroup Group_USBClassMSCommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* Mass Storage Class.
*
* @{
*/
......@@ -64,6 +70,127 @@
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
#define MS_COMMAND_DIR_DATA_IN (1 << 7)
/** SCSI Command Code for an INQUIRY command. */
#define SCSI_CMD_INQUIRY 0x12
/** SCSI Command Code for a REQUEST SENSE command. */
#define SCSI_CMD_REQUEST_SENSE 0x03
/** SCSI Command Code for a TEST UNIT READY command. */
#define SCSI_CMD_TEST_UNIT_READY 0x00
/** SCSI Command Code for a READ CAPACITY (10) command. */
#define SCSI_CMD_READ_CAPACITY_10 0x25
/** SCSI Command Code for a SEND DIAGNOSTIC command. */
#define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
/** SCSI Command Code for a PREVENT ALLOW MEDIUM REMOVAL command. */
#define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
/** SCSI Command Code for a WRITE (10) command. */
#define SCSI_CMD_WRITE_10 0x2A
/** SCSI Command Code for a READ (10) command. */
#define SCSI_CMD_READ_10 0x28
/** SCSI Command Code for a WRITE (6) command. */
#define SCSI_CMD_WRITE_6 0x0A
/** SCSI Command Code for a READ (6) command. */
#define SCSI_CMD_READ_6 0x08
/** SCSI Command Code for a VERIFY (10) command. */
#define SCSI_CMD_VERIFY_10 0x2F
/** SCSI Command Code for a MODE SENSE (6) command. */
#define SCSI_CMD_MODE_SENSE_6 0x1A
/** SCSI Command Code for a MODE SENSE (10) command. */
#define SCSI_CMD_MODE_SENSE_10 0x5A
/** SCSI Sense Code to indicate no error has ocurred. */
#define SCSI_SENSE_KEY_GOOD 0x00
/** SCSI Sense Code to indicate that the device has recovered from an error. */
#define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
/** SCSI Sense Code to indicate that the device is not ready for a new command. */
#define SCSI_SENSE_KEY_NOT_READY 0x02
/** SCSI Sense Code to indicate an error whilst accessing the medium. */
#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
/** SCSI Sense Code to indicate a hardware has ocurred. */
#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
/** SCSI Sense Code to indicate that an illegal request has been issued. */
#define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
/** SCSI Sense Code to indicate that the unit requires attention from the host to indicate
* a reset event, medium removal or other condition.
*/
#define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
/** SCSI Sense Code to indicate that a write attempt on a protected block has been made. */
#define SCSI_SENSE_KEY_DATA_PROTECT 0x07
/** SCSI Sense Code to indicate an error while trying to write to a write-once medium. */
#define SCSI_SENSE_KEY_BLANK_CHECK 0x08
/** SCSI Sense Code to indicate a vendor specific error has ocurred. */
#define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
/** SCSI Sense Code to indicate that an EXTENDED COPY command has aborted due to an error. */
#define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
/** SCSI Sense Code to indicate that the device has aborted the issued command. */
#define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
/** SCSI Sense Code to indicate an attempt to write past the end of a partition has been made. */
#define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
/** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
#define SCSI_SENSE_KEY_MISCOMPARE 0x0E
/** SCSI Additional Sense Code to indicate no additional sense information is available. */
#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
/** SCSI Additional Sense Code to indicate that the logical unit (LUN) addressed is not ready. */
#define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
/** SCSI Additional Sense Code to indicate an invalid field was encountered while processing the issued command. */
#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
/** SCSI Additional Sense Code to indicate that an attemp to write to a protected area was made. */
#define SCSI_ASENSE_WRITE_PROTECTED 0x27
/** SCSI Additional Sense Code to indicate an error whilst formatting the device medium. */
#define SCSI_ASENSE_FORMAT_ERROR 0x31
/** SCSI Additional Sense Code to indicate an invalid command was issued. */
#define SCSI_ASENSE_INVALID_COMMAND 0x20
/** SCSI Additional Sense Code to indicate a write to a block out outside of the medium's range was issued. */
#define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
/** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
/** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
#define SCSI_ASENSEQ_NO_QUALIFIER 0x00
/** SCSI Additional Sense Qualifier Code to indicate that a medium format command failed to complete. */
#define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
/** SCSI Additional Sense Qualifier Code to indicate that an initializing command must be issued before the issued
* command can be executed.
*/
#define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
/** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
/* Type defines: */
/** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
typedef struct
......
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassRNDIS
* @defgroup Group_USBClassRNDISCommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* RNDIS Class.
*
* @{
*/
......
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header containing macros for possible SCSI commands and SENSE data. Refer to
* the SCSI standard documentation for more information on each SCSI command and
* the SENSE data.
*/
#ifndef _SCSI_CODES_H_
#define _SCSI_CODES_H_
/* Macros: */
#define SCSI_CMD_INQUIRY 0x12
#define SCSI_CMD_REQUEST_SENSE 0x03
#define SCSI_CMD_TEST_UNIT_READY 0x00
#define SCSI_CMD_READ_CAPACITY_10 0x25
#define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
#define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_CMD_WRITE_10 0x2A
#define SCSI_CMD_READ_10 0x28
#define SCSI_CMD_WRITE_6 0x0A
#define SCSI_CMD_READ_6 0x08
#define SCSI_CMD_VERIFY_10 0x2F
#define SCSI_CMD_MODE_SENSE_6 0x1A
#define SCSI_CMD_MODE_SENSE_10 0x5A
#define SCSI_SENSE_KEY_GOOD 0x00
#define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
#define SCSI_SENSE_KEY_NOT_READY 0x02
#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
#define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
#define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
#define SCSI_SENSE_KEY_DATA_PROTECT 0x07
#define SCSI_SENSE_KEY_BLANK_CHECK 0x08
#define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
#define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
#define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
#define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
#define SCSI_SENSE_KEY_MISCOMPARE 0x0E
#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
#define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
#define SCSI_ASENSE_WRITE_PROTECTED 0x27
#define SCSI_ASENSE_FORMAT_ERROR 0x31
#define SCSI_ASENSE_INVALID_COMMAND 0x20
#define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
#define SCSI_ASENSEQ_NO_QUALIFIER 0x00
#define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
#define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
#endif
......@@ -29,6 +29,12 @@
*/
/** \ingroup Group_USBClassSI
* @defgroup Group_USBClassSICommon Common Class Definitions
*
* \section Module Description
* Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
* Still Image Class.
*
* @{
*/
......
......@@ -47,7 +47,6 @@
/* Includes: */
#include "../../USB.h"
#include "../Common/MassStorage.h"
#include "../Common/SCSICodes.h"
#include <string.h>
......
......@@ -47,7 +47,6 @@
/* Includes: */
#include "../../USB.h"
#include "../Common/MassStorage.h"
#include "../Common/SCSICodes.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
......
......@@ -26,6 +26,8 @@
* - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set
* - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size
* - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability
* - Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity
* - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code
*
* <b>Fixed:</b>
* - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment