Commit edcfaf77 authored by Dean Camera's avatar Dean Camera
Browse files

Fix build errors in host demos due to usage of pipe error codes which have now been renamed.

parent 0137001e
......@@ -73,7 +73,7 @@ static uint32_t MassStore_Tag = 1;
*/
static uint8_t MassStore_SendCommand(void)
{
uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* Each transmission should have a unique tag value, excluding values 0 and 0xFFFFFFFF */
if (++MassStore_Tag == 0xFFFFFFFF)
......@@ -84,7 +84,7 @@ static uint8_t MassStore_SendCommand(void)
Pipe_Unfreeze();
/* Write the CBW command to the OUT pipe */
if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Send the data in the OUT pipe to the attached device */
......@@ -95,7 +95,7 @@ static uint8_t MassStore_SendCommand(void)
/* Freeze pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Waits until the attached device is ready to accept data following a CBW, checking
......@@ -127,7 +127,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Check to see if the timeout period for the command has elapsed */
if (!(TimeoutMSRem))
return PIPE_RWSTREAM_ERROR_Timeout;
return PIPE_RWSTREAM_Timeout;
}
Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
......@@ -138,7 +138,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Clear the stall condition on the OUT pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);
return PIPE_RWSTREAM_ERROR_PipeStalled;
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
......@@ -149,15 +149,15 @@ static uint8_t MassStore_WaitForDataReceived(void)
/* Clear the stall condition on the IN pipe */
MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);
return PIPE_RWSTREAM_ERROR_PipeStalled;
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
return PIPE_RWSTREAM_DeviceDisconnected;
};
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Sends or receives the transaction's data stage to or from the attached device, reading or
......@@ -169,7 +169,7 @@ static uint8_t MassStore_WaitForDataReceived(void)
*/
static uint8_t MassStore_SendReceiveData(void* BufferPtr)
{
uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
uint16_t BytesRem = SCSICommandBlock.Header.DataTransferLength;
/* Check the direction of the SCSI command data stage */
......@@ -180,7 +180,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
Pipe_Unfreeze();
/* Read in the block data from the pipe */
if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
......@@ -193,7 +193,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
Pipe_Unfreeze();
/* Write the block data to the pipe */
if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Acknowledge the packet */
......@@ -205,7 +205,7 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
/* Freeze used pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Routine to receive the current CSW from the device.
......@@ -214,10 +214,10 @@ static uint8_t MassStore_SendReceiveData(void* BufferPtr)
*/
static uint8_t MassStore_GetReturnedStatus(void)
{
uint8_t ErrorCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
/* If an error in the command ocurred, abort */
if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Select the IN data pipe for data reception */
......@@ -225,7 +225,7 @@ static uint8_t MassStore_GetReturnedStatus(void)
Pipe_Unfreeze();
/* Load in the CSW from the attached device */
if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError)
return ErrorCode;
/* Clear the data ready for next reception */
......@@ -234,7 +234,7 @@ static uint8_t MassStore_GetReturnedStatus(void)
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Clears the stall condition in the attached device on the nominated endpoint number.
......@@ -327,7 +327,7 @@ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
*/
uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue REQUEST SENSE command */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -357,27 +357,27 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned sense data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the
......@@ -394,7 +394,7 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_
uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to read in the given blocks from the device */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -428,27 +428,27 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAd
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned block data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the
......@@ -465,7 +465,7 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAd
uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,
const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to write the given blocks to the device */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -499,20 +499,20 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockA
MassStore_SendCommand();
/* Write the data to the device from the buffer */
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept
......@@ -524,7 +524,7 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockA
*/
uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue TEST UNIT READY command */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -554,13 +554,13 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
MassStore_SendCommand();
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the
......@@ -573,7 +573,7 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
*/
uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue READ CAPACITY command */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -607,14 +607,14 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
MassStore_SendCommand();
/* Wait until data received from the device */
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
/* Read the returned capacity data into the buffer */
if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
......@@ -625,13 +625,13 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);
/* Read in the returned CSW from the device */
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)
{
Pipe_Freeze();
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from
......@@ -645,7 +645,7 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const Ca
*/
uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval)
{
uint8_t ReturnCode = PIPE_RWSTREAM_ERROR_NoError;
uint8_t ReturnCode = PIPE_RWSTREAM_NoError;
/* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
SCSICommandBlock = (CommandBlockWrapper_t)
......@@ -681,5 +681,5 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool P
return ReturnCode;
}
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
......@@ -119,7 +119,7 @@ uint8_t SImage_RecieveBlockHeader(void)
if (!(TimeoutMSRem))
{
/* Return error code */
return PIPE_RWSTREAM_ERROR_Timeout;
return PIPE_RWSTREAM_Timeout;
}
}
......@@ -132,7 +132,7 @@ uint8_t SImage_RecieveBlockHeader(void)
SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);
/* Return error code and break out of the loop */
return PIPE_RWSTREAM_ERROR_PipeStalled;
return PIPE_RWSTREAM_PipeStalled;
}
Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
......@@ -144,14 +144,14 @@ uint8_t SImage_RecieveBlockHeader(void)
SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);
/* Return error code */
return PIPE_RWSTREAM_ERROR_PipeStalled;
return PIPE_RWSTREAM_PipeStalled;
}
/* Check to see if the device was disconnected, if so exit function */
if (!(USB_IsConnected))
{
/* Return error code */
return PIPE_RWSTREAM_ERROR_DeviceDisconnected;
return PIPE_RWSTREAM_DeviceDisconnected;
}
};
......@@ -185,7 +185,7 @@ uint8_t SImage_RecieveBlockHeader(void)
/* Freeze the IN pipe after use */
Pipe_Freeze();
return PIPE_RWSTREAM_ERROR_NoError;
return PIPE_RWSTREAM_NoError;
}
/** Function to send the given data to the device, after a command block has been issued.
......
......@@ -222,7 +222,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response data block */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
......@@ -273,7 +273,7 @@ TASK(USB_SImage_Host)
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
/* Receive the final response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
......@@ -301,7 +301,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
......@@ -329,7 +329,7 @@ TASK(USB_SImage_Host)
SImage_SendBlockHeader();
/* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_NoError)
{
ShowCommandError(ErrorCode, false);
break;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment