Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato).

Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.

Ensure TPI enable timing requirements are met in AVRISP-MKII programmer. Remove invalid code in the TPI read/write functions.

Manually pull PDI clock pin high for 1ms before disabling PDI mode in the AVRISP-MKII project, to ensure that the PDI bus is disabled in the target and /RESET functionality restored.

Enhance TemperatureDatalogger project -- add RTC capabilities so that data is logged along with the current time and date. Make logging interval configurable, set by a C# PC host application.

Combine AVRISP project TPI and PDI lib directories - these protocols use the same underlying XPROG wrapper for the host-to-programmer command wrapping.

Enhance the HotmailNotifier project so that the LEDs' individual brightness can be controlled individually via software PWM.

Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.

Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.

Minor code cleanups (remove redundant comments, fix spacing, etc.).

Better checking of whether a packet is received in the RNDISEthernetHost Class driver demo - show busy LED status while packets are being printed out.

Fix RNDIS Device Class driver - RNDISConstants.h has moved out to the Common Class driver directory.

Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint.

Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.

Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.

Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().

Make Mass Storage device Class driver accept resets at any time, rather than just after a command block has been processed.

Remove the HID device parser from the boot protocol Keyboard/Mouse demos.

Remove dependancies from the LowLevel demos to the ClassDriver demos, since the use of ClassDriver headers now outputs an error when NO_STREAM_CALLBACKS is used.

Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.

Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop. Increased the default number of collection paths allowable by the parser.

Add new manual pages detailing the advantages of LUFA over the official Atmel USB AVR stack, and reasons why LUFA should be used over a built-from-scratch USB stack.

Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.

Fix AudioOutput and AudioInput class driver demos' descriptors -- incorrect value was being supplied in the audio descritors field giving the number of discrete audio formats the device supports.

Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.

Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.

Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.

Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.

MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.

Added beginnings of a MIDI class bootloader.

Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a device ID (thanks to Andrei Krainev).

Move Dataflash operational checking code out from SCSI.c into the DataflashManager.c in the Device mode Mass Storage demos.

Add new attributes to the HID Report Parser and HID Host Mode Class driver to keep track of the largest report the device can send for buffer allocation purposes. Change MouseHostWithParser and KeyboardHostWithParser demos to only allocate the needed number of bytes.

Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.

Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

Fix allowable F_CPU values comment in project makefiles.

Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.

Fix spelling of "Received" in all source files where it is misspelt "Recieved".