Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell).

Re-added Pipe_IsEndpointBound() calls to the CDC and RNDIS host class drivers, not that the function has the correct behaviour for devices with bidirectional endpoints.

Clean up HTTP webserver code in the Webserver project, so that it follows the uIP application structure guidelines and uses cleaner state machine based code.

Use _delay_us() function in the XPROGTarget.c file to ensure timing requirements are met, rather than a fixed number of NOPs.

Oops - PDI handshake delay was too long, causing the device's /RESET functionality to be re-enabled.

Add TCP retransmission support to the HTTP webserver in the Webserver project, so that lost segments are retransmitted as needed.

Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.

Oops - TPI programming is broken in the AVRISP project because the busy-flag check wasn't inverting the result.

Add MIME type handling to the Webserver project, so that files of different types (e.g. images) can be served out to HTTP clients.

Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter.

Fix up project documentation files' overview tables, so that multiple items occupy multiple lines in the same cell, rather than multiple cells.

Add FatFS library to the Webserver project, extend the HTTP server so that it now serves files from the Dataflash. Add Mass Storage device mode class driver so that files can be loaded to the board Dataflash when inserted into a PC.

Be doubly-certain that the incomming CDC class driver's endpoint/pipe is flushed only once when the bank is empty.

Clean up Webserver project - add more Doxygen documentation for the new DHCP client functions and defines.

Add DHCP server to the Webserver demo for automatic network configuration. Correct uIP timer clock not tracking the correct timespan.

Ensure TPI enable timing requirements are met in AVRISP-MKII programmer. Remove invalid code in the TPI read/write functions.

Manually pull PDI clock pin high for 1ms before disabling PDI mode in the AVRISP-MKII project, to ensure that the PDI bus is disabled in the target and /RESET functionality restored.

Fix TemperatureDataLogger and Webserver project builds.

Fix Doxygen configuration files' input file exclusion filters.

Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe.

Minor code cleanups, remove TemperatureDataLogger host application's Visual Studio Solution files, add LibHIDNet license files.

Added explicit ADC channel masks for the standard set of ADC channels, as the single-ended channel MUX masks are not equal to the channel number on some AVR models. Changed demos to use the new channel masks when using the ADC driver.

Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming ranges are specified (thanks to Thomas Bleeker).

Enhance TemperatureDatalogger project -- add RTC capabilities so that data is logged along with the current time and date. Make logging interval configurable, set by a C# PC host application.

Fix up the incomplete Webserver project so that it integrates with the uIP stack correctly. Add simple HTTP webserver as a placeholder until FatFS can be integrated.

Begin to look into the RNDIS Host Class Driver, which seems to crash on test hardware after many packets have been received.