Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.

Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.

Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.

Change project makefiles so that the current target settings and not just the board selection is printed during the build process.

Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.

State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.

Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.

Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.

Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.

Completed host CDC class driver enumeration code.

Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.

Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.

Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.

Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.

Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.

Documented FAST_STREAM_TRANSFERS compile time option.

Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.

Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.

Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.

Trim unique serial number created by the USE_INTERNAL_SERIAL option to 12 characters rather than 20 - apparently Windows will implode if a serial number is too long.

Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.

Re-add in simple scheduler for compatibility with legacy code, mark all scheduler related files as deprecated.

Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.

Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.

Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.

Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.

Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().

Better documentation for the MissleLauncher project - add credit to PyLauncher project.

Remove ConfigDescriptor.c/.h files from the ClassDriver Host demos, as they will be obsoleted when the Host mode class drivers are complete. Add new StillImage stub class driver common header.

Enhanced class drivers to use the same public/private section seperations as other portions of the library.

Split out common defines/types from class drivers into a seperate common class driver directory.

Make central USB Class driver dispatch headers, used for both device and host modes.

Copy over schedulerless host demos to ClassDrivers directory, for later modification to new Host mode USB class drivers.

Deleted Host ClassDriver demos -- not yet started, faster to rebase new ClassDriver demos from the newly schedulerless LowLevel host demos rather than re-convert each demo from the previous scheduler-based implementations.

Fixes to MassStorageHost demo to improve compatibility with more USB drives.

Converted Host mode demos to schedulerless. Fixed host mode broken due to earlier Start-of-frame event experiments.