Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.

Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.

Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.

Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.

Fix incorrect model compatibility information in the Host LowLevel demo overview text files.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.

Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.

Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.

Change project makefiles so that the current target settings and not just the board selection is printed during the build process.

Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.

Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.

Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.

Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.

Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.

Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.

Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.

Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.

Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.

Fix unfinished printer host demo - some printer languages use embedded NULLs and so strlen() won't work in all cases. Ensure NULL terminator for the test page is not transmitted to the device.

Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.

Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.

Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).

Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.

Documented FAST_STREAM_TRANSFERS compile time option.

Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.

Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.

Added verbose documentation for each of the USB Host state machine states.

Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.

Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.

Added parameter directions to function parameter documentation.

Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.

Oops - SCSI INQUIRY data uses fixed-length, non-terminated strings -- need to copy the strings to a temp buffer and terminate before using them in printf.

MassStorageHost demo now retrieves Inquiry data from the device during enumeration, and prints the device's Vendor and Product IDs.

Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.

Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.

Changed Pipe stream functions to automatically set the pipe token, allowing them to be used on bidirectional pipes without having to explicitly call Pipe_SetPipeToken() beforehand.

Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.

Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.

Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.

Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.

Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.

Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.

Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.

Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().

Better documentation for the MissleLauncher project - add credit to PyLauncher project.

Added new USB_Host_SetDeviceConfiguration() convenience function. Change over Low Level host demos to use the new routine.