Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.

Removed string descriptors from the TeensyHID bootloader to reduce its size.

Fix TeensyHID bootloader - change vendor page in the descriptors to match the undocumented page needed for the new Teensy 2.0 boards.

Commit for the 091223 release.

Correct TeensyHID bootloader descriptors to use the correct revision code for the ATMEGA32U4 based Teensy revision.

Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.

Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.

Minor code cleanups (remove redundant comments, fix spacing, etc.).

Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices.

Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.

Add to the existing CDC Class Driver's CreateStream() function documentation to explicitly state that the created streams are bidirectional.

Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.

Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.

Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.

Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.

MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.

Added beginnings of a MIDI class bootloader.

Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID.

More additions to the unfinished HID Host Class Driver.

Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.

Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.

Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.

Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.

Remove information about 64 bit Windows OS signing requirements for the CDC based demos -- apparently the native CDC driver can be installed without first disabling the OS's driver signing requirements.

Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.

Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.

Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.

Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

Fix allowable F_CPU values comment in project makefiles.

Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.

CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).

The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.

Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.

Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.

Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.

Removed unused relative Common.h header include from the DriverStubs board stub drivers.

Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.

Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.

Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.

Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.

Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.

Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).

Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).

Change project makefiles so that the current target settings and not just the board selection is printed during the build process.

Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.

Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.

Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.

Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.

Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.

Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.

Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.