Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.

Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.

Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.

Changed Dataflash_Init() to no longer call SPI_Init() automatically.

Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.

Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.

Fix up references to functions in the Endpoint/Pipe documentation.

Change spinloop in the AVRISP project Unknown V2 Protocol Command handler to use Endpoint_WaitUntilReady() instead to prevent infinite loops.

Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.

Added documentation of the makefile CDEFS values to the MagStripe project.

Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient.

Fix up Programmers Notepad Project file to show new Projects directory layout. Remove now moved AVRISP project from the Projects directory makefile.

Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.

Enhancements to the AVRISP Programmer project to attempt to get AVRStudio to communicate with the device.

Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.

Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.

Fix USBtoSerial device demos -- ensure the UDR1 register contents is read in under all circumstances which fire the ISR, so that the receive complete interrupt is cleared correctly to prevent freezes.

Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.

Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.

Minor updates to the unfinished SideShow demo for clarity.

Added unfinished MassStorageHost class driver demo.

SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested HID interface within the device, not all HID interfaces.

Apply correct fix to the HID report parser for PUSH items - current HID item attribute stack was being copied in the wrong direction.

Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered.

Minor documentation fixes.

Remove stray state variable from the CDC host class driver.

Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.

Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.

Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.

Make HID host class driver include the HID report parser.

Adjustments to the CDC and MIDI device class drivers to use sizeof() on the actual variable being transmitted or received rather than its datatype to reduce possible mistakes.

Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.

Further work on the new CDC and HID host mode class drivers.

Reset changelog et. al. to reset development information for the new version currently under development.

Cleanups to RNDIS device demos. Fix issue in RNDIS demos where the memory would become corrupted due to an incorrect bounds check when iterating over the port state table, causing random resets.

Revert change to Template_Endpoint_Control_R.c, which broke control stream reads.

Remove uneeded ADC.h include in the class driver AudioOutput demo.

Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.

Fix incorrect event name in MassStorageHost.c.

Simplify CDC device demos, by directly assigning the string to transmit to the pointer, rather than using an intermediatary table to hold all the possible transmit strings.

Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.

Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.

Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.

Removed unused relative Common.h header include from the DriverStubs board stub drivers.

Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.

Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.

Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.

Fix incorrect model compatibility information in the Host LowLevel demo overview text files.

Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.