Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).

Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).

Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs).

Make LEDs more responsive in the AudioOutput device demos.

Fix incorrect HWB button mask in the STK526 Buttons driver.

Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.

Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.

Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.

Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.

State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.

Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.

Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.

Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.

Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.

Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.

Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.

Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.

Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure.

Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.

Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).

Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).

Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).

Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.

Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.

Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).

Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.

Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.

Documented FAST_STREAM_TRANSFERS compile time option.

Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.

Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.

Added verbose documentation for each of the USB Host state machine states.

Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.

Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.

Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.

Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.

Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.

Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.

Added parameter directions to function parameter documentation.

Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.

Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.

Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.

Changed Pipe stream functions to automatically set the pipe token, allowing them to be used on bidirectional pipes without having to explicitly call Pipe_SetPipeToken() beforehand.

Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.