Partial fix to the Bluetooth SDP code - data should be encoded in big endian, not little endian.

Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to an overflow in the checksum calculation loop (thanks to Kevin Malec).

Removed string Attributes from the Service Discovery Protocol code to minimise the potential points of failure while the base code is being debugged.

Add UUID Class matching to the Service Discovery Protocol code - SDP is now correctly matched against the generic Service Discovery Class UUID.

SDP Service improvements; fixed UUID for SDP service, added Service Discovery Server UUID, better documentation.

Oops - when adding a sequence header to the SDP response, the size value needs to be cleared, not the buffer pointer.

Service Discovery ServiceSearchAttribute requests require the response to be grouped by UUID, so the response can't be generated as the attributes are read in. Buffer both UUIDs and Attributes instead and generate the response afterwards.

Short UUIDs are measured in bytes, not bits -- update Service Discovery Protocol code so that it can now correctly match against UUIDs in the service table.

More SDP code improvements - responses to ServiceSearchAttribute service discovery requests should now be valid, even if they do not currently return the device's services and service attributes.

Added more documentation to the incomplete Bluetooth stack code.

Renamed CDC device class demos' ManagementEndpoint descriptor to NotificationEndpoint to more accurately indicate its purpose.

Switch over the BluetoothHost demo's Service Discovery code to pass around more generic GUID arrays.

Fix nasty bug in USBInterrupt.c which would cause a lockup if the control endpoint was not selected at the point the USB endpoint interrupt fires when INTERRUPT_CONTROL_ENDPOINT is defined.

Refactor Service Discovery Protocol code in the incomplete Bluetooth Host demo, so that the UUID list is compiled via a seperate function to allow for its re-use between different SDP request types.

Add new ReportType parameter to the HID class driver device callback and host report sending routines.

Renamed internal Host mode Class driver descriptor comparator callback routines so that they all start with a uniform DCOMP_{Class Abbreviation}_ prefix.

Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

Change over instances of "make" in the makefiles to "$(MAKE)" to allow for the make tool to be overridden.

Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects.

The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead.

Use puts_P() and printf_P() instead of the normal variants where possible in the Host mode Class Driver demos.

Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.

USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run.

Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR.

Factored out Bluetooth state information into a new state structure for easy reference in the user application.

Added new StackInitialized() Bluetooth stack callback function.

Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski).

Clean up incomplete BluetoothHost debugging commands to use GCC extension to avoid NULL parameters when no formatting is required.

Minor documentation improvements.

Rename FunctionAttributes.h to Attributes.h, as some attributes are applicable to variables also. Add new ATTR_NOINIT attribute for global variables.

Add the beginnings of a SDP implentation to the incomplete BluetoothHost demo.

Add const attribute to the Mass Storage Host driver functions where it was applicable, but missing.

Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code.

Added spacing between multiple paragraphs in Doxygen \note sections.

Removed call to the clock prescaler reset function in the Teensy bootloader to save space - the user application is accessed via a watchdog reset anyway, so the prescale reset would only affect the speed of the bootloader itself.

Document the Bluetooth ACL layer. Remove unneeded parameters from the signalling command processing routines.

Change over the code so that the bluetooth packet data is read in by the stack rather than the user application, to make it more unform for sending/receiving, and so the library can handle incomming fragmentation in the future.

Start Service Discovery Protocol decoding and processing.

Add some more documentation to the half-completed Bluetooth Host demo, fix the OpenChannel() command initialising the channel information structure to the wrong initial state once the CONNECTION REQUEST command has been sent to the remote device.

Fix Bluetooth stack CONNECTION RESPONSE packets - for this command and this command only, the source/destination roles are switched. Reverse the Local/Remote channel ordering so that Windows mobile and other stacks which depend on valid channel values to connect.

Add Link Key Request event processing so that paired devices always re-authenticate until appropriate link key store/retrieve callbacks are implemented.