Add more include protection macros to give the user warnings when they try to manually include private driver header files, instead of the public driver headers.

Re-added Pipe_IsEndpointBound() calls to the CDC and RNDIS host class drivers, not that the function has the correct behaviour for devices with bidirectional endpoints.

Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders

Changed incomplete Webserver project over to using the uIP timer library.

Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be used (thanks to Daniel Levy).

Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.

Fix inverted bit-banged USART logic in the AVRISP project for PDI programming. Add a delay to the clock toggling in the AVRISP project to ensure that the programming speed does not exceed 10MHz under any conditions to satisfy the limits in the datasheet for all target voltages. Fix incorrect pin being used as the DATA in in PDI programming mode.

Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.

Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.

Minor code cleanups (remove redundant comments, fix spacing, etc.).

Fix double oops -- Host mode settle delay was still being ignored due to inverted logic, HID Parser was assigning the usage Min/Max usage value to the report item's collection path rather than the report item itself.

Oops - fix Host mode pre-enumeration settle delay being ignored leading to failure to enumerate certain devices.

Simplified the USB.h master include file's target validity checks.

Fixed all Class drivers to ensure they have appropriate guards on each function to ensure the device is enumerated before running, fixed error codes on all guards to return "DeviceDisconnected" where possble.

Renamed HOST_SENDCONTROL_DeviceDisconnect enum value to HOST_SENDCONTROL_DeviceDisconnected to be in line with the rest of the library enum error codes.

Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.

Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero.

Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount.

Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK.

The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.

The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).

The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.

The USB_MODE_HOST token is now defined even when host mode is not available.

Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.

Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when the given data length is zero.

Fix incorrect compiler error message when F_CLOCK is not defined by the user (thanks to Dave Lyons).

Change device demos which use the joystick to use the natural UP, DOWN, LEFT, RIGHT ordering in all demos when checking the joystick's position.

Update CDC Class Driver character stream functions to use the correct avr-libc return codes for errors and EOF.

Fix pointer arithmetic on void byte buffers by explicitly typecasting the buffer pointers to uint8_t* before altering them.

Descriptor processing routines now pass around void pointers rather than uint8_t pointers, as their destination datatype is know well known -- they are just streams of bytes until they are cast to the correct destination type by DESCRIPTOR_CAST.

Add double banking property to LUFA powered projects in the Projects directory. Add guards to macro parameters to ensure that formulas passed as parameters don't mess up the internal macro structure.

Update DevChapter9.c - use the Endpoint_ClearStatusStage() function where possible to reduce code size and (potentially) allow for centralized status stage timeouts.

Fix Joystick device demo HID descriptors - buttons should be placed outside the Pointer collection.

Add new manual pages detailing the advantages of LUFA over the official Atmel USB AVR stack, and reasons why LUFA should be used over a built-from-scratch USB stack.

Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.

Simplify AudioOutput demos, to reduce the number of cycles needed to process each incomming sample.

Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.

MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.

Added beginnings of a MIDI class bootloader.

Doxygen fixes to \param directives to give data direction in all projects. Make HID item filtering routines clearer in the HID WithParser demos.