Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the U4 series USB AVR parts.

Fix missing text from the Host Mode States enum documentation.

Fix TWI driver not aborting when faced with no response after attempting to address a device on the bus.

Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond.

Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register.

Update Temperature board driver to be AVR32 compatible when the ADC peripheral driver is eventually ported. Make architecture includes explicit for both the AVR32 and the AVR8, to make way for future architecture ports.

Add SPI driver aliases for the old function names in the AVR8 driver, so that existing code will still compile against the new version.

Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin.

Fix broken AVR8 Serial peripheral driver.

Make SPI and USART peripheral dispatch driver headers in preparation for a set of AVR32 peripheral drivers.

Turn OFF double banking in the Webserver demo - leaving it on seems to destroy the system throughput.

Fix HID Host Class driver sending incorrect ReportType values to the device when issuing requests via the control pipe.

Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato).

Add more include protection macros to give the user warnings when they try to manually include private driver header files, instead of the public driver headers.

Moved the USB_GetHIDReportItemInfo() calls into the main report item passing loop in the *HostWithParser demos - it is fast enough not to effect performance, and avoids duplicate code.

Make Webserver project report the LUFA version as part of the HTTP header.

Fix AVRISP-MKII clone project's TPI Chip Erase command processing - ensure erase location is the high byte in the given address space, check NVMBUSY for completion rather than the NVM Bus Enable bit.

Change If-Else chains over to switch statements in XPROGProtocol.c for clarity.

Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF.

New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.

Replace the Webserver demo's uIP with the latest code ripped from the Contiki project by Adam Dunkels.

Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen).

Mark the AVRISP-MKII project descriptors as being both Bus Powered and Device Powered.

Copy over file level documentation of the peripheral drivers to the module level documentation.

Make board specific and device peripheral specific drivers' file documentation copy over to the module documentation, so that it is visible in the normal module view of the library documentation.

Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell).

Re-added Pipe_IsEndpointBound() calls to the CDC and RNDIS host class drivers, not that the function has the correct behaviour for devices with bidirectional endpoints.

Be doubly-certain that the incomming CDC class driver's endpoint/pipe is flushed only once when the bank is empty.

Clean up Webserver project - add more Doxygen documentation for the new DHCP client functions and defines.

Fix TemperatureDataLogger and Webserver project builds.

Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe.