Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.

Documented FAST_STREAM_TRANSFERS compile time option.

Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.

Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.

Added verbose documentation for each of the USB Host state machine states.

Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.

Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.

Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.

Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.

Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.

Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.

Added parameter directions to function parameter documentation.

Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.

Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.

Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.

Changed Pipe stream functions to automatically set the pipe token, allowing them to be used on bidirectional pipes without having to explicitly call Pipe_SetPipeToken() beforehand.

Optimize unique serial number reading code for size -- remove atoi/toupper references, replace with hand-rolled code as the input has known size constraints.

Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.

Trim unique serial number created by the USE_INTERNAL_SERIAL option to 12 characters rather than 20 - apparently Windows will implode if a serial number is too long.

Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.

Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.

Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.

Re-add in simple scheduler for compatibility with legacy code, mark all scheduler related files as deprecated.

Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.

Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.

Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.

Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.

Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().

Better documentation for the MissleLauncher project - add credit to PyLauncher project.

Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.

Added new USB_Host_SetDeviceConfiguration() convenience function. Change over Low Level host demos to use the new routine.

Remove ConfigDescriptor.c/.h files from the ClassDriver Host demos, as they will be obsoleted when the Host mode class drivers are complete. Add new StillImage stub class driver common header.

Enhanced class drivers to use the same public/private section seperations as other portions of the library.