Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.

Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.

Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.

Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.

Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).

Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.

Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.

Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.

Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).

Optimise Endpoint_ConfigureEndpoint_Prv() function to produce smaller code when CONTROL_ONLY_DEVICE compile time token is defined.

Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.

Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will not break communications with the host by exceeding the maximum control request stage timeout period.

Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.


Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.

Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).

Clarify in the documentation that the Audio demos and driver is for the Audio 1.0 specification, not the newer (and more advanced/less supported) 2.0 specification.

Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger).

Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)

Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist within the supplied report of a multiple report HID device.

Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.

Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.

Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.

Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.

Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.

Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.

Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.

Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.

Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).

Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.

More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.

Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.

Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.

Add special support to the AVRISP-MKII for the new model USBTINY-MKII's additional LED to indicate target power source.

Add support to the USBTINY-MKII's additional LED in the board's LED driver header.

Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.

Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.

Added new SPI_ORDER_* data order masks to the SPI peripheral driver.

Use static inline intermediatary functions in Endpoint.h to handle the masking for the private endpoint configuration routine, instead of performing the masking in the Endpoint_ConfigureEndpoint() macro.

Move over message ID specific header data to unions inside the standard TMC header structure, so that all header data is read in one chunk in the incomplete TMC demo.

Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders.

Added start of the Incomplete TMC demo's command parser code.

Convert over internal pseudo-function macros to true inline functions for added type-safety and compile-checking.

Indent core library function parameters so that there is only one parameter per line, to increase readability.

Move and rename DevChaper9.c/.h and HostChapter9.c/.h to the HighLevel directory, new named DeviceStandardReq.c/.h and HostStandardReq.c/.h.

Rename LowLevel.c/.h to USBController.c/.h.

Remove dependancies on the complete <avr/io.h> header in the HighLevel USB driver directory, to ensure less work is required in later (possible) ports.

Reduce spacing of the structure elements in StdDescriptors.h to make the code more readable.

Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green).