Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to minimal loads and stores rather than complicated shifts.

Fixed SCSI.c implementations of all the demos/projects casting the block count to a 32-bit temporary before calling SwapEndian_16().

Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.

Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.

Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.

Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.

Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.

Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.

Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.

Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.

Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.

Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.

Fix Doxygen formatting of parameters for the CALLBACK_HID_Device_CreateHIDReport() function in the ClassDriver HID device demos.

Split RFCOMM channel signals into Remote and Local pairs. Use memcpy() to copy over data from the command parameters to the RFCOMM response parameters.

Ensure that only the valid parameter bytes are sent back in response to MSC commands.

Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.

Use a bitmask instead of an array of bools in the SDP UUID List matching algorithm to reduce the compiled code size and stack used.

Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.

Rename RFCOMM_GetFrameDataLength() to RFCOMM_GetVariableFieldValue() as it is multi-purpose, and modify it to move the buffer pointer itself rather than relying on the caller.

Make RFCOMM_GetChannelData() return NULL if the required channel DLCI is found, but the channel is closed.

Add modem signals (BREAK, DCD, etc.) to the channel state array, and add in a handler for the Modem Status RFCOMM control command.

Changed the RFCOMM-specific ItemProtocolChannel_t type to a more generic ItemProtocol_8BitParam_t name, and added a new ItemProtocol_16BitParam_t to the SDP protocol type defines.

Add missing BT_* prefix to the Bluetooth stack's channel state enum values.

Split out the RFCOMM Control Channel command processing code into a seperate set of files for clarity.

Rename the incomplete Bluetooth Host demo's ServiceDiscoveryProtocol.c/.h files to SDP.c/.h. Fix compile errors in RFCOMM.c/.h.

Minor fixes to demos to add in some missing comments, printf() formatting. Make incomplete Bluetooth demo indicate connections visually via the board LEDs.

Add stub RFCOMM command handlers. Move out RFCOMM frame length and data pointer calculations to the master RFCOMM frame reception routine, instead of inside each frame type handler function.

More RFCOMM layer implementation - fix FCS calculation, add in start of control channel command processing.

Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.

Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.

Document Bluetooth files with overall file Doxygen comments. Add more initial RFCOMM layer code to receive and respond to SABM packets.

Start implementation of RFCOMM decoding layer. Add new service initialize routines for each Bluetooth service - currently unused, but will eventually reset the service state of RFCOMM when a new connection is made.

Delay needed in bluetooth code due to the send function not waiting for the pipe bank to become ready before writing. Add in a call to Pipe_WaitUntilReady() to fix the issue.

Extra protocol value in the RFCOMM protocol is the channel number, not the PSM - update typedef name and size.

Add delay to the Connection Request signal processing routine - without this, the host will not create the RFCOMM channel correctly. Need to investigate why this delay is needed.

Add PSM value to the RFCOMM service so that the host knows what PSM to use on channels when trying to access it.

Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.

Fix byte ordering of UUIDs in the SDP server - host can now successfully pair to the Bluetooth device and discover the exposed Serial Port Profile RFCOMM service.

The SDP UUID lists should be searched and ALL UUIDs matched for a record to be retrieved, not partial matches. Change the SDP code so that the entire list must be matched against a service attribute table's contents before it is returned.

Change matching algorithm so that it recursively searches through the entire attribute table, and not just pre-specified sequence attributes.

Add browse lists and proper descriptions to the Serial Port service.